Article No
11210550
Housing
8 mm x 25.1 mm; Plastic
Sensing Range
3 m
Baumer
Light barriers/photoelectric sensors
O200.RP-GW1J.72CV
Retro-reflective sensors
Technical Specifications
Article No
11210550
Housing
- 8 mm x 25.1 mm
- Plastic
Sensing Range
3 m
Features
- Push-pull
- Cable, 4-pin, 5 m
- -25 … +50 °C
- IP 67
Detailed Technical Data
Genel veriler
Type
Retro-reflective sensor
Wavelength
644 nm
Light source
Pulsed PinPoint LED
Sensitivity setting
Teach-in and IO-Link
Gerçek range Sb
3 m
Nominal range Sn
4 m
Polarizasyon filtresi
Yes
Output indicator
Yellow LED
Optical axis hizalaması
< 1,5°
Power-on indicator
Green LED
Hizalama / kirli lens indicator
Yanıp sönen output indicator
Suppression of reciprocal influence
Yes
Tanınabilen en small object (typical)
4 mm (FTAR 013A000)
Mechanical Data
Depth
15.8 mm
Design
Rectangle
Mekanik mounting
Smooth sleeve (stainless steel)
Width / diameter
8 mm
Housing material
Plastic (ASA, PMMA)
Front side (optics)
PMMA
Connection types
4-pin cable, 2 m
Height / length
25.1 mm
Cable characteristics
PVC / PVC 4 x 0.08 mm²
Electrical Data
Output current
50 mA
Output circuit
Push-pull
Output function
In light / in the dark operating
Short-circuit protection
Yes
Typical current consumption
16 mA (@ 24 VDC)
Voltage drop Vd
<2 VDC
Reverse polarity protection
Yes
Supply voltage range +Vs
10 … 30 VDC
Max. current consumption (no load)
40 mA (@ 10 VDC)
Response time / release time
< 0.25 ms
Environmental Conditions
Protection class
IP 67
Operating temperature
-25 … +50 °C
Communication interface
Interface
IO-Link V1.1
Additional data
Signal power, fazla gain, operating çevrimleri, device temperature
Baud rate
230.4 kBaud (COM 3)
Cycle time
≥ 0.6 ms
IO-Link port type
Class A
Proses data yapısı
Bit 0 = SSC1 (presence)Bit 2 = qualityBit 3 = alarmBit 5 = SSC4 (counter)Bit 16-31 = 16 Bit measurement
Process data length
32 Bit
Adjustable parameters
Switching point, time filtreleri, LED status indicators, output logic, counter, sensor element circuit outer release, Find Me fonksiyonu, Teach-in mode