MAGRES EAM580R-B - CANopen®/SAE J1939
Housing ø10...15 mm (blind hollow shaft)
Sensing Range ≤16384 / 14 bit
Baumer Industrial absolute encoders

MAGRES EAM580R-B - CANopen®/SAE J1939

Absolute encoder

Technical Specifications

Housing ø10...15 mm (blind hollow shaft)
Sensing Range ≤16384 / 14 bit
Features
  • Single- or multi-turn encoder / CANopen®/SAE J1939
  • E1 approval (KBA)
  • High protection rating IP 67
  • High resistance to shock and vibration
  • Corrosion protection CX (C5-M)
  • Cable cross-section 0.5 mm²
  • Electronic gear function
  • Applicable up to PLd (ISO 13849)

Detailed Technical Data

TEKNIK VERILER - MEKANIK TASARIM

Resistance EN 60068-2-6 Vibration 30 g, 10-2000 HzEN 60068-2-27 Shock 500 g, 1 ms
Material Housing: dust painted steel flange: alüminyumOyuk mil: stainless steel
Connection Flange connector M12, 5-pinKablo 2 m
Shaft type ø10...15 mm (blind recessed mil)
Relative humidity 95 %
Dimension (flange) ø58 mm
Starting torque ≤2.5 Ncm (+20 °C, IP 67)
Protection EN 60529 IP 67 (mil felt seal with)
Corrosion protection IEC 60068-2-52 Tuz sisiISO 12944-2 per spec CX (C5-M) ambient conditions for
Operating speed ≤6000 rpm
Moment of inertia 46.75 gcm²
Approximate weight 250 g
Operating temperature -40...+85 °C (see general information)

TECHNICAL DATA - ELECTRICAL RATINGS

Approval UL approval / E217823E1 approval (KBA)
Interface CANopen®SAE J1939
Function MultiturnSingleturn
Number of turns ≤262144 / 18 bit
Code sequence CW: flanşa bakıldığında saat in the direction dönüşle artan değerler
Supply voltage 10...30 VDC
MTTFd(ISO 13849) High (>100 yıl)Safety fonksiyonlarında only Application Note and MTTFd güvenilirlik tahminine dayanarak kullanınız (also on request ediniz).
Absolute accuracy ±0.15 ° (+20 ±15 °C)±0.25 ° (-40...+85 °C)
Consumption (typical) 20 mA (24 VDC, w/o load)
Emitted interference EN 61000-6-4UN ECE R10
Output stages CAN-Bus, LV (3.3 V) compatible ISO 11898
Start-up time power after power on ≤ 170 ms
Detection method Magnetic
Profile conformity CANopen® CiA communication profili DS 301, LSS profili DSP 305, device profili DS 406
Steps per revolution ≤16384 / 14 bit
Interference immunity EN 61000-6-2UN ECE R10

Documents

architecture CAD open_in_new Open
shopping_cart

Quote Cart

shopping_cart

Your cart is empty.

You can add products from product pages.

compare_arrows Compare 0 / 3
Canlı sohbet çok yakında aktif edilecektir.