Housing
ø10 x 20 mm, solid shaft, flatted
Sensing Range
≤16384 / 14 bit
Baumer
Industrial absolute encoders
MAGRES redundant EAM580R-SC – CANopen®
Absolute encoder
Technical Specifications
Housing
ø10 x 20 mm, solid shaft, flatted
Sensing Range
≤16384 / 14 bit
Features
- Single- or multiturn encoder / CANopen® redundant
- Galvanic isolation with redundant sensing
- Resolution: max. 32 bits (14 bits ST, 18 bits MT)
- E1 approval (KBA)
- High protection rating IP 67
- High resistance to shock and vibrations
- Corrosion protection CX (C5-M)
- Wire cross-section 0.5 mm²
- Applicable up to PLd (ISO 13849)
Detailed Technical Data
TEKNIK VERILER - MEKANIK TASARIM
Flange
Clamping flange
Resistance
EN 60068-2-6 Vibration 30 g, 10-2000 HzEN 60068-2-27 Shock 500 g, 1 ms
Material
Housing: dust painted steel flange: alüminyumMil: stainless steel
Connection
Flange connector M12, 5-pinKablo 2 m
Shaft type
ø10 x 20 mm, flat with surface full mil
Relative humidity
95 %
Dimension (flange)
ø58 mm
Starting torque
≤2.5 Ncm (+20 °C, IP 67)
Protection EN 60529
IP 67 (mil felt seal with)
Corrosion protection
IEC 60068-2-52 Tuz sisiISO 12944-2 per spec CX (C5-M) ambient conditions for
Operating speed
≤6000 rpm
Moment of inertia
15.38 gcm²
Approximate weight
250 g
Operating temperature
-40...+85 °C (see general information)
İzin verilen shaft load
≤40 N axial≤80 N radial
TECHNICAL DATA - ELECTRICAL RATINGS
Approval
UL approval / E217823E1 approval (KBA)
Interface
CANopen®
Function
MultiturnSingleturn
Number of turns
≤262144 / 18 bit
Code sequence
CW: flanşa bakıldığında saat in the direction dönüşle artan değerler
Supply voltage
10...30 VDC
MTTFd(ISO 13849)
Kanal per high (>100 yıl)Safety fonksiyonlarında only Application Note and MTTFd güvenilirlik tahminine dayanarak kullanınız (also on request ediniz).
Absolute accuracy
±0.15 ° (+20 ±15 °C)±0.25 ° (-40...+85 °C)
Consumption (typical)
35 mA (24 VDC, w/o load)
Emitted interference
EN 61000-6-4UN ECE R10
Output stages
CAN-Bus, LV (5 V) compatible ISO 11898
Start-up time
power after power on ≤ 1 sn
Detection method
Magnetic
Profile conformity
CANopen® CiACommunication profile DS 301LSS profile DSP 305Device profile DS 406
Steps per revolution
≤16384 / 14 bit
Interference immunity
EN 61000-6-2UN ECE R10