Housing
ø10 mm solid shaft
Sensing Range
≤16384 / 14 bit
Baumer
Industrial absolute encoders
GA240 - SSI
Absolute encoder
Technical Specifications
Housing
ø10 mm solid shaft
Sensing Range
≤16384 / 14 bit
Features
- Single-turn encoder / SSI
- Optical sensing method
- Resolution: 14 bits
- Clamping flange
- Electronic zero-point setting
- Available with additional incremental output
Detailed Technical Data
TEKNIK VERILER - MEKANIK TASARIM
Flange
Clamping flange
Resistance
EN 60068-2-6 Vibration ±0,75 mm - 10-58 Hz, 10 g - 58-2000 HzEN 60068-2-27 Shock 200 g, 6 ms
Material
Body: aluminum; Flange: aluminum
Connection
M23 connector, 12-pin; M12 connector, 8-pin; 1-meter cable
Shaft type
ø10 mm full mil
Relative humidity
%95 non-condensing
Dimension (flange)
ø58 mm
Starting torque
≤0.015 Nm (+25 °C, IP 54)≤0.03 Nm (+25 °C, IP 65)
Protection EN 60529
IP 54 (mil felt seal without)IP 65 (mil felt seal with)
Operating speed
≤10000 rpm (mechanical)≤6000 rpm (electric)
Approximate weight
250 g
Rotor moment of inertia
14.5 gcm²
Operating temperature
-25...+85 °C-40...+85 °C (optional)
İzin verilen shaft load
≤20 N axial≤40 N radial
TECHNICAL DATA - ELECTRICAL RATINGS
Code
Grey or binary
Approval
UL approval / E63076
Inputs
SSI saatiUP/DOWN ters and zero control sinyalleri
Interface
SSIIncremental A 90° B (optional)
Function
Singleturn
Code sequence
bağlantıya according to CW/CCW coded
Supply voltage
10...30 VDC5 VDC ±%10 (on request)
Absolute accuracy
±0.025 °
Emitted interference
EN 61000-6-4
Output stages
SSI data: Line driver (Linedriver) RS422push-pull diyagnostik çıkışlarArtımsal (Incremental): push-pull or line driver (linedriver) RS422
Detection method
Optical
Diagnostic fonksiyonu
Self-diagnosis
Steps per revolution
≤16384 / 14 bit
Consumption w/o load
≤50 mA (24 VDC)
Incremental output
2048 pulses A90°B + inverted
Reverse polarity protection
Yes (10..30 VDC) / No (5 VDC)
Start-up time (typical)
power after power on 20 ms
Interference immunity
EN 61000-6-2