Housing
ø10 x 20 mm, flat with solid shaft / ø3/8" x 4/5" (ø9.525 x 20.32 mm), flat with solid shaft
Sensing Range
1 … 65536
Baumer
Programmable encoders
optoPulse EIL580P-SQ
Incremental encoder
Technical Specifications
Housing
ø10 x 20 mm, flat with solid shaft / ø3/8" x 4/5" (ø9.525 x 20.32 mm), flat with solid shaft
Sensing Range
1 … 65536
Features
- TTL/RS422
- HTL/push-pull
Detailed Technical Data
TEKNIK VERILER - MEKANIK TASARIM
Flange
Frame flange 2.5" (63.5 mm)
Resistance
EN 60068-2-6 Vibration 30 g, 10-2000 HzEN 60068-2-27 Shock 300 g, 6 ms
Material
Housing: aluminium dökümFlanş: alüminyumDolu mil: stainless steel
Connection
Flange connector M12, 8-pin flange connector M23, 12-pinKablo
Shaft type
ø10 x 20 mm, flat with surface full milø3/8" x 4/5" (ø9,525 x 20,32 mm), flat with surface full mil
Relative humidity
%90 non-condensing
Dimension (flange)
2.5 x 2.5" (63.5 x 63.5 mm)
Starting torque
≤0.015 Nm (+20 °C, IP 65)≤0.02 Nm (+20 °C, IP 67)
Protection EN 60529
IP 65 (mil felt seal without)IP 67 (mil felt seal with)
Operating speed
≤6000 rpm (+20 °C, IP 67)≤12000 rpm (+20 °C, IP 65)
Approximate weight
370 g
Operating temperature
-40...+100 °C
İzin verilen shaft load
≤40 N axial≤80 N radial
TECHNICAL DATA - ELECTRICAL RATINGS
Approval
UL 508 / CSA 22.2
Reference signal
Zero pulse 90° or 180°
Supply voltage
4.75...30 VDC
Emitted interference
EN 61000-6-3
Output stages
TTL/RS422HTL/push-pull
Start-up time
power after power on ≤ 30 ms
Duty cycle
1024, 2048 ppr'de typical %45…55 (ayrıntı for Duty Cycle tablosuna see)
Output frequency
≤300 kHz (TTL)≤160 kHz (HTL)
Output signals
A+, B+, R+, A-, B-, R-
Detection method
Optical
Pulses per revolution
1 … 65536
Consumption w/o load
≤70 mA
Short-circuit protected
Yes
Programmable parameters
Output seviyesi TTL/HTLDarbe number 1...65536Sıfır shock width 90°/180°Zero pulse konumuSinyal sırası
Reverse polarity protection
Yes
Interference immunity
EN 61000-6-2