Article No
11731298
Housing
ø11 x 30 mm (keyed solid shaft)
Sensing Range
1024
Baumer
Heavy-duty incremental encoders
EHOG1095-S11101C22
Incremental encoder
Technical Specifications
Article No
11731298
Housing
ø11 x 30 mm (keyed solid shaft)
Sensing Range
1024
Features
HTL-P (power line driver)
Detailed Technical Data
TEKNIK VERILER - MEKANIK TASARIM
Resistance
IEC 60068-2-6 Vibration 5 g, 10-2000 HzIEC 60068-2-27 Shock 50 g, 11 ms
Material
Body: aluminum, powder-coated; Shaft: stainless steel
Connection
With plug itmeli terminal bloklu and cable rakorlu terminal box 2xM20
Shaft type
ø11 x 30 mm (switch-type flat mil)
Mounting type
Flat mil: EURO flange B10
Dimension (flange)
ø105 mm, length 133 mm
Starting torque
≤136 Ncm
Protection EN 60529
IP 66 / IP 67
Corrosion protection
IEC 60068-2-52 Salt mistfor ortam conditions CX in accordance with ISO 12944-2
Operating speed
≤6000 rpm (mechanical)
Rotor moment of inertia
400 gcm²
Operating temperature
-40...+100 °C
İzin verilen shaft load
≤350 N axial≤450 N radial
TECHNICAL DATA - ELECTRICAL RATINGS
Approval
CE
Phase shift
Typ. 90 °
Shaft isolation
Suitable up to 1 kV
Reference signal
Zero pulse, width 90° or 180°
Supply voltage
4.75...30 VDC (Vin = Vout, HTL/TTL)
Emitted interference
EN 61000-6-4
Output stages
HTL-P (heavy-duty line driver)
Duty cycle
Typ. 50 %
Output signals
K1, K2, K0 + inverted
İletim length
≤350 m at 100 kHz (HTL-P)
Detection method
Optical
Pulses per revolution
1024
Consumption w/o load
≤100 mA
Interference immunity
EN 61000-6-2
Output frequency (typical)
≤200 kHz
Other pulses per revolution values
Pulse numbers parameterized ex works
Technical Data - Electrical Values (Centrifugal Switch)
Switching sapması
≤3 % (cw-ccw rotation)
Switching accuracy
± 4 % (Δn = 2 rpm/s)
Switching hysteresis
40 % of switching speed
Switching outputs
1 output, speed control
Output switching capacity
3A / 230 VAC (90 °C), ≤100 mA / 230 VAC (100 °C)1A / 125 VDC (90 °C), ≤100 mA / 125 VDC (100 °C)(EAC: <50 VAC / 75 VDC)