Housing
ø10...15 mm (blind hollow shaft)
Sensing Range
CAN-Bus, LV (5 V) compatible ISO 11898
Baumer
Functional safety encoders
MAGRES EAM580RS-B - CANopen® Safety
Absolute encoder
Technical Specifications
Housing
ø10...15 mm (blind hollow shaft)
Sensing Range
CAN-Bus, LV (5 V) compatible ISO 11898
Features
- Safety encoder (single- or multi-turn), SIL 2, PL d – Cat. 3
- Safe communication via CANopen® Safety and CANopen® communication with standard data package
- Galvanically isolated and short-circuit-protected CAN interface
- High resistance to shock, vibrations and temperature changes
- E1-compliant design (ECE R10, Rev. 6)
- High protection rating IP 67
- Corrosion protection CX (C5-M)
- Electronic gear function (non-safety-rated)
- Additional diagnostic data
Detailed Technical Data
TEKNIK VERILER - MEKANIK TASARIM
Resistance
EN 60068-2-6Vibration 10 g, 10-2000 HzEN 60068-2-27Shock 40 g, 6 ms (5000 shocks)
Material
Housing: paslanmaz steel flange: alüminyumMil: stainless steel
Connection
Flange connector 1xM12, 5-pin flange connector 2xM12, 5-pinKablo 2 m
Shaft type
ø10...15 mm (blind recessed mil)
Relative humidity
%95 non-condensing
Dimension (flange)
ø58 mm
Starting torque
≤2.5 Ncm (+20 °C)
Protection EN 60529
IP 65 (against connector fitted / on request)IP 66 (against connector fitted)IP 67 (against connector fitted)
Corrosion protection
IEC 60068-2-52 Tuz sisiISO 12944-2 per spec CX (C5-M) ambient conditions for
Operating speed
≤3000 rpm
Angular acceleration
≤1x10^4 rad/s²
Approximate weight
280 g
Storage temperature
-40...+85 °C
Operating temperature
-40...+75 °C (see general information)
İzin verilen mil sapması
Dynamic: ±0.1 mm (radial / axial) Static: ±0.3 mm (radial / axial) (specifications for stator coupling 11728840)
Safety-Related Key Features
PFHD(EN 61508)
9.5 E-9
PFDavg(EN 61508)
8.3 E-4
DCavg(EN ISO 13849)
90.5 %
MTTFd(EN ISO 13849)
618 years
Category (EN ISO 13849)
3
TM (service life, EN ISO 13849)
20 years
Performance Level (EN ISO 13849)
PL d
TECHNICAL DATA - ELECTRICAL RATINGS
Approval
IEC 61800-5-3 per spec CESIL 2, EN 61508EN ISO 13849-1 per spec PL d / Kat. 3UL approval (≤42 VDC) / E217823(UL işareti UL508'e dayanır and safety sertifikasyonundan bağımsızdır)
Interface
CANopen®CANopen® Safety (EN 50325-5, EN 50325-4 tabanlı communication)
Function
MultiturnSingleturn
Number of turns
≤262144 / 18 bit
Code sequence
CW: flanşa bakıldığında saat in the direction dönüşle artan değerler
Supply voltage
8...48 VDC
Absolute accuracy
±0.2 ° (+20 ±15 °C, see general information)±0.3 ° (-40...+75 °C, see general information)
Consumption (typical)
35 mA (24 VDC, w/o load)
Emitted interference
EN 61000-6-3ISO 7637-2:2004** Severity level according to ECE R10 (Rev. 6)
Output stages
CAN-Bus, LV (5 V) compatible ISO 11898
Start-up time
power after power on ≤ 1 sn
Detection method
Magnetic
Error response time
≤ 15 ms
Overvoltage protection
Yes (≤60 VDC)
Profile conformity
CANopen® CiACommunication profile DS 301LSS profile DSP 305Device profile DS 406
Diagnostic fonksiyonu
Device temperature izlemeBesleme voltage izlemeCW - CCW rotation sayısıAçma/kapama operating cycle sayacıÇalışma saati counter
Steps per revolution
≤16384 / 14 bit
Resolution / SRDO
Güvenli ivme 16 bitGüvenli speed 16 bitGüvenli position 32 bit
Sistem nominal voltage
12 / 24 VDC
Reverse polarity protection
Yes
Interference immunity
EN 61000-6-2IEC 61326-3-1IEC 61800-5-2ISO 11452-2:2004* / -5:2002*ISO 7637-2:2004*ISO 10605:2008 + Amd 1:2014 (CD ±8 kV / AD ±15 kV)* Severity level according to ECE R10 (Rev. 6)
Environmental Conditions (ISO 16750)
ISO 16750-2 (Electrical loads)ISO 16750-5 (Chemical load)** Partial