Housing
0.1 °
Sensing Range
Tip. ±0.2°
Baumer
Static tilt sensors
GIM140R - 1-dimensional, CANopen®
Tilt sensor
Technical Specifications
Housing
0.1 °
Sensing Range
Tip. ±0.2°
Features
- Size 48 mm
- MEMS capacitive measuring principle
- CANopen® / CANopen® redundant interface
- Protection up to IP 69K
- Corrosion protection CX (C5-M)
- E1 approval (KBA)
- UL approval
- Load dump protection
- Connection cable and M12 connector
- Wire cross-section 0.5 mm²
- Redundant version (2-channel architecture)
Detailed Technical Data
TEKNIK VERILER - MEKANIK TASARIM
Resistance
EN 60068-2-6Vibration 20 g, 58-2000 HzEN 60068-2-27Shock 50 g, 6 ms
Material
Body: aluminum, anodized
Connection
Cable 0,3 mKablo 0,3 m, M12 with connector
Protection EN 60529
IP 67IP 69K
Corrosion protection
IEC 60068-2-52 Tuz sisiISO 12944-2 per spec CX (C5-M) ambient conditions for
Temperature changes
EN 60068-2-14, -40…+85 °C, 5 döngü
Dimensions W x H x L
48 x 14 x 45 mm
Approximate weight
45 g
Operating temperature
-40...+85 °C (see general information)
TECHNICAL DATA - ELECTRICAL RATINGS
Approval
E1-typeUN ECE 10R06UL approval / E217823
Interface
CANopen®
Limit frequency
0.1...25 Hz, 2. order / low passing filtre (Varsayılan: 2 Hz)
Repeatability
± 0.1 ° (+25 °C)
Resolution
0.1 °
Detection speed
1600 Hz (0.625 ms)
Supply voltage
8...36 VDC
Load dump protection
ISO 16750-2Test Level A, 12 V/24 V systems
Consumption (typical)
28 mA (24 VDC, w/o load)56 mA (24 VDC, w/o load, redundant)
Emitted interference
EN 61000-6-3 ECE Reg. No. 10R06 ISO 7637-2
Output stages
CAN-Bus compatible ISO 11898
Start-up time
≤ 0.5 s after power on
Detection method
MEMS technology
Accuracy (+25 °C)
Typical ±0.2°
Measuring range
0...360°
Short-circuit protected
Yes (28 VDC or ground)
Temperature coefficient
0.01 °/K
Programmable parameters
Front ayar and offsetFilter
Reverse polarity protection
Yes
Interference immunity
EN 61000-6-2 ECE Reg. No. 10R06 ISO 7637-2