Housing
0.01 ° CANopen®0.01 ° SAE J193912 bit Analog
Sensing Range
Tip. ±0.1°
Baumer
Static tilt sensors
GIM500R - 2-dimensional
Tilt sensor
Technical Specifications
Housing
0.01 ° CANopen®0.01 ° SAE J193912 bit Analog
Sensing Range
Tip. ±0.1°
Features
- Size: 52 mm
- MEMS capacitive measuring principle
- E1-compliant design
- Interfaces: CANopen®, SAE J1939, Analogue
- Connection: M12 and cable
- Protection rating: up to IP 69K
- Applicable up to PLd (ISO 13849)
Detailed Technical Data
TEKNIK VERILER - MEKANIK TASARIM
Resistance
EN 60068-2-6Vibration 20 g, 60-2000 HzEN 60068-2-27Shock 200 g, 6 ms
Material
Housing: aluminium, coated
Connection
Flange connector M12, 8-pin flange connector M12, 5-pinKablo 1 m
Protection EN 60529
IP 66IP 67IP 68IP 69K
Corrosion protection
IEC 60068-2-52 Tuz sisiISO 12944-2 per spec CX (C5-M) ambient conditions for
Dimensions W x H x L
48 x 24 x 52 mm
Approximate weight
95 g
Operating temperature
-40...+85 °C (see general information)
TECHNICAL DATA - ELECTRICAL RATINGS
Approval
UL approval / E63076
Interface
CANopen®SAE J1939Analog (4...20 mA / 0.5...4.5 V / 0...5 V / 0...10 V)
Limit frequency
0.1...25 Hz, 2. order / low passing filtre (Varsayılan: 5 Hz)
Load resistor
≥1 kΩ / voltage output ≤ 800 Ω / current output
Repeatability
± 0.1 ° (+25 °C)
Resolution
0.01 ° CANopen®0.01 ° SAE J193912 bit Analog
Detection speed
1600 Hz
Supply voltage
8...36 VDC
MTTFd(ISO 13849)
High (>100 yıl)Safety fonksiyonlarında only Application Note and MTTFd güvenilirlik tahminine dayanarak kullanınız (also on request ediniz).
Emitted interference
EN 61000-6-4 ECE Reg. No. 10R04 ISO 7637-2 / EN 55025
Start-up time
≤ 0.5 s after power on
Status indicator
DUO-LED integrated in housing
Diagnostic fonksiyonu
Parameter error
Accuracy (+25 °C)
Typical ±0.1°
Measuring range
±10°/±30°/±45°/±60°/±90°
Consumption w/o load
≤40 mA (24 VDC)
Temperature coefficient
0.008 °/K
Programmable parameters
Front ayar and offsetFilter
Reverse polarity protection
Yes
Interference immunity
EN 61000-6-2 ECE Reg. No. 10R04 ISO 7637-2 ISO 11452-2 / ISO 11452-5
Çapraz axis sensitivity (typical)
0.3 % (see general information)