Article No
11210035
Baumer
Temperature measurement
FlexTop 2222-0001.0
Temperature transmitter
Technical Specifications
Article No
11210035
Features
- HART® communication via universal transmitter
- Programmable via the integrated USB port or HART® modem
- Sensor calibration for offset, slope or polynomial adjustment
- Accuracy better than 0.1°C for RTD elements
- Automatic cable compensation calibration (2-wire)
- Fast sampling time < 50 ms
- Galvanically isolated
- ATEX and IECEx certified
Detailed Technical Data
Output signal
Damping
0 … 60 s
Accuracy
< 0.025 % FSR
Load resistance
Rs ≤ (V DC - 7 V)/0.023 A
Characteristic
Linear or özelleştirilmiş with max.. 30 nokta
Ripple immunity
< 1 % FSR (1 Vrms, 50Hz...1kHz)
Resolution
14 bit
Output Signal
4 … 20 mA , 2 telli20 … 4 mA , 2 wire
Temperature drift
± 0.01 %/K , max..
Up/Down scaling limits
23 mA / 3.5 mA
Basamak response time, T90
< 450 ms
Supply voltage dalgalanmasının etkisi
0.001 %/V
HART® Interface
Protocol
HCF standartı, Rev..7, „Temperature Device Ailesi“ komutları dahil
Properties
Seri numarasını okuKullanıcı ID'sini oku/değiştirKonfigürasyonu oku/değiştirGiriş signal değerini okuÇıkış signal değerini okuGiriş signal kaydı2 with point sensor setting (trim)For daha fazla information lütfen bkz. ‚HART Field Device Specification‘
Environmental Conditions
Humidity
< 98 % RH , condensing
İzolasyon voltage
1.5 kV AC
Protection degree (EN 60529)
IP 55
COMPLIANCE AND APPROVALS
EMC
EN 61326-1DNV GL - Class AEN 50121-3-2:2016
Namur
NE21