Orbitmerret
Panel ölçüm cihazları
Ölçüm cihazları
OM 45DC
Technical Specifications
Input Signal
DC Gerilim / Akım
Display / Digits
4 hane
Mounting
Panel montaj (96×24 mm)
Output / Communication
—
Detailed Technical Data
tune
Input
DC – Range
±199,99 µA
< 500 mV
input 1
±1,9999 mA
< 500 mV
input 1
±19,999 mA
< 500 mV
input 1
±199,99 mA
< 200 mV
input 1
±1,9999 V
1 MOhm
input 1
±19,999 V
1 MOhm
input 1
±199,99 V
1 MOhm
input 2
tune
Display
Display range
±19999, single-colour 7-segment LED
Display height
14 mm
Display colour
red, green
Decimal point
adjustable by a short-circuit connector
Display brightness
adjustable by a trimmer under the front panel
tune
Settings
Control
The device is designed for simple measurement without further control
The display can be adjusted within the range of ± 10% for both extr. positions by the trimmers under the front panel
tune
Device Accuracy and Functions
Temperature coefficient
100 ppm/°C
Accuracy
±0,15 % of range + 1 digit
Speed
1,2/2,5/5/10 measurement/s
Overload capacity
2x
10x (t < 30 ms) - for değil > 200 V
Calibration
at 25°C and 40% relative humidity
tune
Power supply
Power supply
12…24 VDC/max, 2,3 W, non-isolated
250 VAC/50 Hz, ±10 %, 2,5 VA
Power supply protection
protected by a fuse inside the device
tune
Operating Conditions
Connection
terminal connection card, cable cross-section < 2,5 mm²
Stabilisation time
within 15 minutes after power-on
Operating temperature
0°…60°C
Storage temperature
-10°…85°C
Protection class
IP40 (only front panel)
Electrical safety
EN 61010-1, A2
Dielectric strength
2,5 kVAC for 1 min. between power supply and input
Insulation resistance
AC power supply | 670 V (ZI), 300 V (Di)*
DC power supply, input | 300 V (ZI), 150 V (Di)*
EMC
EN 61326-1
tune
Mechanical Characteristics
Material
Noryl GFN2 SE1, flame-retardant UL 94 V-I
Dimensions
96 x 24 x 100 mm (w x h x d)
Panel cut-out dimensions
90,5 x 21,5 mm (w x h)