Orbitmerret
Panel ölçüm cihazları
Ölçüm cihazları
OML 643UQC
Technical Specifications
Input Signal
Frekans / Sayıcı
Display / Digits
6 hane
Mounting
Panel montaj (96×48 mm)
Output / Communication
Röle
Detailed Technical Data
tune
Input
UQC – Input
selectable from menu
on contact, TTL, NPN/PNP
0...30 V, comparison levels are adjustable from menu or automatic
UQC – Input frequency
0,1 Hz…50 kHz (mode SINGLE)
0,1 Hz…20 kHz (mode UP/DW)
0,1 Hz…20 kHz (UP-DW)
0,1 Hz…20 kHz (mode QUADR. - frequency)
0,1 Hz…10 kHz (mode QUADR. - counter)
(for 50% duty cycle)
UQC – Measurement mode
SINGLE | Counter/frequency
QUADR | Counter/frekans for IRC sensor
UP/DW | Counter/frequency
UP - DW | Counter/frequency
TIME | Stopwatch
RTC | Clock
UQC – Time base
0,5/1/2/5/10 s
UQC – Calibration coefficient
0,00001…999999
UQC – Front setting
0…999999
UQC – Input filtresi
out
5/40/100/1 000 Hz
UQC – Functions
Preset | initial non-zero value, which is always read after resetting the instrument
current value | single setting of the initial value
Summation | registration of numbers during shift operation
Time backup | time is running even when the device is off (the display is off either)
External inputs – Number
1 input, contact input
External inputs – Functions
OFF | No function
HOLD | stops the measurement (option
Display - Analog output - Limits)
LOCK | Front panel tuşlarını kilitle
TARE | Dara activation
CLEAR | display reset
SUM | Total display
CL.SUM. | Resetting sum
CLR. ST. | input clears (presets) stop-watch/counter, Stop-watch also stops
COUNT. | Switching display Counter/frequency
Magnet – Placement
Lower right corner of the display
Mıknatıs – Function
The same functions as for the input can be set in the menu for the magnet + stopwatch control
tune
Display
Display range
-99999…999999,single-colour 7-segment LED
Display height
14 mm
Display colour
red, green
Signal LED'i
1 | Limit L1 (red)
T | Tare (green)
C, F | channellar - counter, frekans (turuncu)
Decimal point
adjustable from menu - fixed or floating
Display brightness
adjustable from menu, automatically
Displayed values
COUNT. | Value from channel Counter
FREQ. | Value from channel frequency
tune
Settings
Control
The device is controlled and set by beş buttons located under the front panel
The selected functions can also be controlled via the external inputs
Menu
LIGHT | contains only the items required for basic device settings, accessed with a password
PROFI | All device settings, accessed with a password
USER | user menu made up of any items selected from LIGHT/PROFI. Access without password.
OM Link
the company's communication interface for running, configuring and updating the device firmware
The OM Link program is also designed for visualising and logging measured values from multiple devices
tune
Device Accuracy and Functions
Temperature coefficient
50 ppm/°C
Accuracy
±0,02 % of range + 1 digit
±0,02 % of value ±2 ms (stopwatch)
±0,02 % of value ±130 ms (RTC)
Overload capacity
2x
10x (t < 30 ms)
Linearisation
25 noktalı lineer interpolasyon (only OM Link via)
Digital filters
exponential average | 2…100 measurements
rounding | sets the display step
input filter | transmits input signal range 5…1 000 Hz
1/Fr. | filter for frequency conversion to time
Functions
Tare | resets the display on a non-zero input signal
Preset | initial non-zero value, which is read after each counter reset
Summation | number registration upon shift operation
Time backup | time is running even when the power is off (display is off either)
current value | single setting of the initial value
Time yedekleme
Lithium cell CR 2032RV, 3V/220 mAh
Monitoring function
500 ms
Calibration
at 25°C and 40% relative humidity
tune
Comparators
Type
Digital, adjustable from menu, contact bağlantısı < 50 ms
Mode
Hysteresis | sets the switching point, hysteresis band "Mez ± 1/2 Hys." and time (0 ... 99.9 s) switching delay
C-Pulse | auto counter reset on the preset value
Once | switching ON limit, however it opens only after a counter reset
Output
1x relay, kapama contact (250 VAC/30 VDC, 3A)
1x open collector (30 VDC/100 mA)
tune
Power supply
Power supply
10…30 VDC/24 VAC, ±10 %, PF > 0,4, I < 45 A/1 ms
10…30 VDC/24 VAC, ±10 %, PF > 0,4, I < 45 A/1 ms, isolated
Current consumption
< 1,8 W/1,9 VA
tune
Operating Conditions
Connection
terminal board, cable cross-section < 1,5 mm²
Stabilisation time
within 15 minutes after power-on
Operating temperature
-20°…60°C
Storage temperature
-20°…80°C
Protection class
IP65 (only front panel)
Electrical safety
EN 61010-1, A2
Dielectric strength
2,5 kVAC for 1 min. between power supply and input
4 kVAC for 1 min. between input and relay output
Insulation resistance
power supply | 300 V (ZI)*
input, output | 300 V (ZI)*
EMC
EN 61326-1
tune
Mechanical Characteristics
Material
Polycarbonate, flame-retardant UL 94 V-0
Dimensions
96 x 48 x 30 mm (w x h x d)
Panel cut-out dimensions
92 x 44 mm (w x h)