Orbitmerret
Panel ölçüm cihazları
Ölçüm cihazları
OMM 650UC
Technical Specifications
Input Signal
Universal (çoklu giriş)
Display / Digits
6 hane
Mounting
Panel montaj (72×24 mm)
Output / Communication
Röle
Detailed Technical Data
tune
Input
UQC – Input
selectable from menu
on contact, TTL, NPN/PNP
0...30/300 V, comparison levels are adjustable from menu or automatic
UQC – Input frequency
0,1 Hz…50 kHz (mode SINGLE)
0,1 Hz…20 kHz (mode UP/DW)
UQC – Measurement mode
SINGLE | Counter/frequency
UP/DW | Counter/frequency
TIME | Stopwatch
RTC | Clock
UQC – Time base
0,5/1/2/5/10 s
UQC – Calibration coefficient
0,00001…999999
UQC – Front setting
0…999999
UQC – Input filtresi
out
5/40/100/1 000 Hz
UQC – Functions
Preset | initial non-zero value, which is always read after resetting the instrument
Time backup | time is running even when the device is off (the display is off either)
External inputs – Number
1 input, contact input
External inputs – Functions
OFF | No function
HOLD | stops the measurement (option
Display - Analog output - Limits)
LOCK | Front panel tuşlarını kilitle
TARA | tare activation
CLEAR | display reset
CLR. ST. | input clears (presets) stop-watch/counter, Stop-watch also stops
tune
Display
Display range
-99999…999999,single-colour 7-segment LED
Display height
9,1 mm
Display colour
red, green
Signal LED'i
1, 2 | Limits L1, L2 (red)
T | Tare (green)
Decimal point
adjustable from menu - fixed or floating
Display brightness
adjustable from menu
tune
Settings
Control
Device front paneldeki dört düğme with control edilir and ayarlanır
Menu
LIGHT | contains only the items required for basic device settings, accessed with a password
PROFI | All device settings, accessed with a password
USER | user menu made up of any items selected from LIGHT/PROFI. Access without password.
İsteğe bağlı functions
ZAKAZ | düğmenin function none
TARE | Dara function activation
NUL. TA. | resets the tare
START | Start for Stopwatch/watch
CLR | Resetting Stopwatch/Watch
STOP | Stopping Stopwatch/Watch
OM Link
the company's communication interface for running, configuring and updating the device firmware
The OM Link program is also designed for visualising and logging measured values from multiple devices
tune
Device Accuracy and Functions
Temperature coefficient
50 ppm/°C
Accuracy
±0,05 % of range + 1 digit
±0,02 % of value ±2 ms (stopwatch)
±0,02 % of value ±130 ms (RTC)
Overload capacity
2x
10x (t < 30 ms) - for değil 300 V
Linearisation
25 noktalı lineer interpolasyon (only OM Link via)
Digital filters
exponential average | 2…100 measurements
rounding | sets the display step
input filter | transmits input signal range 5…1 000 Hz
Functions
Tare | resets the display on a non-zero input signal
Preset | initial non-zero value, which is read after each counter reset
Time backup | time is running even when the power is off (display is off either)
Time yedekleme
Lithium cell CR 2032RV, 3V/220 mAh
Monitoring function
500 ms
Calibration
at 25°C and 40% relative humidity
tune
Comparators
Type
Digital, adjustable from menu, contact bağlantısı < 50 ms
Mode
Hysteresis | sets the switching point, hysteresis band "Mez ± 1/2 Hys." and time (0 ... 99.9 s) switching delay
C-Pulse (L1) | auto counter reset on the preset value
On Run (L2) | output is active while stopwatch is running
Output
1x bistabil relay (48 VAC/30 VDC, 3A)
2x bistabil relay (48 VAC/30 VDC, 3A)
1x open collector (30 VDC/100 mA)
2x open collector (30 VDC/100 mA)
tune
Power supply
Power supply
10…30 VDC/24 VAC, ±10 %, PF > 0,4, I < 45 A/1 ms, isolated
Current consumption
< 2,1 W/2,2 VA
tune
Operating Conditions
Connection
terminal connection card, cable cross-section < 1,5 mm²
Stabilisation time
within 15 minutes after power-on
Operating temperature
-20°…60°C
Storage temperature
-20°…80°C
Protection class
IP42 (only front panel)
Electrical safety
EN 61010-1, A2
Dielectric strength
2,5 kVAC for 1 min. between power supply and input
4 kVAC for 1 min. between input and relay output
Insulation resistance
power supply | 300 V (ZI)*
input, output | 300 V (ZI), 150 V (Di)*
EMC
EN 61326-1
Seismic capacity
IEC 980: 1993, pair.6
tune
Mechanical Characteristics
Material
Noryl GFN2 SE1, flame-retardant UL 94 V-I
Dimensions
72 x 24 x 106 mm (w x h x d)
Panel cut-out dimensions
68 x 21,5 mm (w x h)