Order No
101209116
Article Code
101209116
Certificates
cULus ASi-SaW
Schmersal
Emniyetli Anahtarlama ve Denetleme
Solenoid Kilitler
AZM 161 BZ ST1-AS RAP
Product Description
- • IP Rating: IP67 | Voltage: 24 VDC | Weight: 451 g | Certification: cULus ASi-SaW | PL e
Standards
- • EN ISO 13849-1 EN IEC 61508
Product Features
- • Solenoid supply 24 VDC (Aux)_x000D_
- • Combined monitoring of actuator and solenoid interlock_x000D_
- • Manuel açma_x000D_
- • Solenoid kilit_x000D_
- • Termoplastik gövde_x000D_
- • High holding force 2000_x000D_
- • 130 mm x 90 mm x 30 mm_x000D_
- • Hatalı kilitlemeye karşı korumalı kilit_x000D_
- • Çift yalıtımlı_x000D_
- • Uzun ömürlü_x000D_
- • Entegre AS-Interface
Technical Specifications
PIN 1
AS-i +
PIN 2
Aux - (P)
PIN 3
AS-Interface -
PIN 4
Aux + (P)
Mounting
Vidalar
Category
3
General Note
Locks operating on the lock-to-lock principle may only be used in special cases, after a thorough assessment of accident risk, since interruption of the electrical supply or the main switch...
PFH Value
1.01 x 10⁻⁷ /h
AS-i ID Code
0xB
AS-i IO Code
0x7
AS-i Profile
S-7.B.F.E
Impact Resistance
30 g / 11 ms
Application Note
Slide-mounted guard cover removable cover hinged guard cover
AS-i ID Code 1
0xF
AS-i ID Code 2
0xE
AS-i Version
V 2.1
Mission Time
20 Year(s)
Please Note
Single channel mekanizmaya tehlikeli hasar for fault of excluding kabul edilebilir that it is and to manipulation counter sufficient protection garanti that is done cases...
Current Consumption
500 mA
Fuse Rating
0.16666666666787933
Gross Weight
451 g
Housing Material
Plastik, cam elyaf takviyeli termoplastik, automatically fading
Protection Class
II
Min. Relative Humidity
0.3
Locking Force
30 N
Pollution Degree
3
Connector Position
Centre
Max. Relative Humidity
0.95
Note (Relative Humidity)
Non-condensing, non-icing
Note (PFH Value)
up to max. 100,000 switching cycles/year
Sensor Length
30 mm
Scope of Delivery
Actuator additionally order must be.
Vibration Resistance
10 … 150 Hz, amplitude 0.35 mm
Manual Lock Release
Yes
AS-i Specification
Safety Slave
AS-i Output DO 0
Solenoid control
AS-i Output DO 1
No function
AS-i Output DO 2
No function
AS-i Output DO 3
No function
IP Protection Class
IP67
Max. Response Time
100 ms
Ambient Temperature
-25 ... +60 °C
Performance Level
e
Sensor Width
130 mm
Operating Voltage
24 VDC -15% / +10% (stabilized PELV power source)
Operating Principle
Elektromekanik
Mechanical Life (min.)
1,000,000 Cycles
Sensor Height
90 mm
AS-i Input Channel 1
Veri bitleri DI 0 / DI 1 = dinamik kod iletimi
AS-i Input Channel 2
Veri bitleri DI 2 / DI 3 = dinamik kod iletimi
Force to Lock
Yes
Fixing Screw Type
3x M6
Terminal Connection
M12 connector plug, 4 pole (A coded)
Max. Actuation Speed
2 m/s
Suitable SIL Applications
2
Max. Installation Altitude
2,000 m
Max. Holding Force Fmax
2,600 N
Note (Manual Lock Release)
Maintenance, kurulum vb. for. M5 triangular anahtar using manuel serbest release, accessory as mevcuttur
AS-i Parameter Bits P0
Actuator detected
AS-i Parameter Bits P1
Solenoid interlock locked
AS-i Parameter Bits P2
Magnet voltage tolerans in the range of
AS-i Parameter Bits P3
Error message - locking/unlocking of the solenoid interlock blocked
Note (Performance Level)
Information about the safety classification of the guard locking function can be found in the "Operating instructions" or "Use and mounting" instructions...
AS-i Max. Current Consumption
100 mA
Number of Actuation Directions
3
AS-i Input Module Address
0
Overvoltage Category
III
Max. Switching Frequency
1,000 /h
Rated Operating Voltage
24 VDC
Note (AS-i Parameter Bits)
Set the parameter outputs to "1111" (0xF). FID: peripheral error
Note (Auxiliary DC Voltage)
stabilized PELV power source
Impulse Withstand Voltage (Uimp)
0.8 kV
Storage/Transport Temperature
-25 ... +85 °C
Integrated System Diagnostics Status
Yes
Coding Level (EN ISO 14119)
Low
Holding Force FZh (EN ISO 14119)
2,000 N
Rated Insulation Voltage (Uᵢ)
32 VDC
Note (AS-i Input Module Address)
Adres 0'a front set; AS-interface bus master or el type programlama device with changeable
Play in Direction of Actuation
5.5 mm
Actuator and Lock Monitored Together
Yes
Note (LED Switching Condition Indication)
(1) LED yellow: Channel 2 / AS-i SaW Bit 2.3 (2) LED green/red (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected (3) LED yellow: Channel 1 / AS-i SaW Bit 0.1