Order No
101211516
Article Code
101211516
Certificates
cULus ASi-SaW
Schmersal
Emniyetli Anahtarlama ve Denetleme
Solenoid Kilitler
AZM 170 BZ ST-AS RP-2197
Product Description
- • IP Rating: IP67 | Voltage: 24 VDC | Weight: 320 g | Certification: cULus ASi-SaW | PL d
Standards
- • EN IEC 61508
Product Features
- • Combined monitoring of actuator and solenoid interlock_x000D_
- • Manual release from side_x000D_
- • Solenoid kilit_x000D_
- • Entegre AS-Interface_x000D_
- • Termoplastik gövde_x000D_
- • 90 mm x 84 mm x 30 mm_x000D_
- • Çift yalıtımlı_x000D_
- • Yüksek tutma kuvveti
Technical Specifications
PIN 1
AS-i +
PIN 2
Aux - (P)
PIN 3
AS-Interface -
PIN 4
Aux + (P)
Category
3
General Note
Locks operating on the lock-to-lock principle may only be used in special cases, after a thorough assessment of accident risk, since interruption of the electrical supply or the main switch...
PFH Value
1.01 x 10⁻⁷ /h
AS-i ID Code
0xB
AS-i IO Code
0x7
AS-i Profile
S-7.B.F.E
Holding Force
1,000 N
AS-i ID Code 1
0xF
AS-i ID Code 2
0xE
AS-i Version
V 2.1
Mission Time
20 Year(s)
Please Note
Single channel mekanizmaya tehlikeli hasar for fault of excluding kabul edilebilir and to manipulation counter sufficient protection garanti that is done cases...
Current Consumption
500 mA
Fuse Rating
0.16666666666787933
Gross Weight
320 g
Housing Material
Plastik, cam elyaf takviyeli termoplastik, automatically fading
Protection Class
II
Min. Relative Humidity
0.3
Locking Force
30 N
Pollution Degree
3
Max. Relative Humidity
0.95
Note (Relative Humidity)
Non-condensing, non-icing
Note (PFH Value)
up to max. 100,000 switching cycles/year
Scope of Delivery
Actuator additionally order must be.
Force to Open
Yes
Manual Lock Release
Yes
AS-i Specification
Safety Slave
AS-i Output DO 0
Solenoid control
AS-i Output DO 1
No function
AS-i Output DO 2
No function
AS-i Output DO 3
No function
IP Protection Class
IP67
Max. Response Time
100 ms
Ambient Temperature
-25 ... +55 °C
Performance Level
d
Sensor Width
108 mm
Operating Voltage
24 VDC -15% / +10% (stabilized PELV power source)
Operating Principle
Elektromekanik
Mechanical Life (min.)
1,000,000 Cycles
Sensor Height
75.5 mm
AS-i Input Channel 1
Veri bitleri DI 0 / DI 1 = dinamik kod iletimi
AS-i Input Channel 2
Veri bitleri DI 2 / DI 3 = dinamik kod iletimi
Terminal Connection
M12 connector plug, 4 pole (A coded)
Max. Actuation Speed
2 m/s
Suitable SIL Applications
2
Note (Manual Lock Release)
M3 triangular switch with manuel lock opening (teslimata included) From the side manuel lock opening
AS-i Parameter Bits P0
Guard door and actuator detected
AS-i Parameter Bits P1
Solenoid interlock locked
AS-i Parameter Bits P2
No function
AS-i Parameter Bits P3
No function
AS-i Max. Current Consumption
100 mA
Number of Actuation Directions
2
AS-i Input Module Address
0
Overvoltage Category
III
Rated Operating Voltage
24 VDC
Note (AS-i Parameter Bits)
Set the parameter outputs to "1111" (0xF). FID: peripheral error
Note (Auxiliary DC Voltage)
stabilized PELV power source
Impulse Withstand Voltage (Uimp)
0.8 kV
Storage/Transport Temperature
-25 ... +85 °C
Integrated System Diagnostics Status
Yes
Rated Insulation Voltage (Uᵢ)
32 VDC
Note (AS-i Input Module Address)
Adres 0'a front set; AS-interface bus master or el type programlama device with changeable
Actuator and Lock Monitored Together
Yes
Note (LED Switching Condition Indication)
(1) LED green: Supply voltage (2) red LED: Communication error / Slave address = 0 (3) LED yellow : Enabling status