Sipariş No
103047212
Sertifikalar
cULus, ASi-SaW cULus
Schmersal
Emniyetli Anahtarlama ve Denetleme
AS-i Emniyet Sistemi
AZM 161 Z ST2-AS RIP ED/TU-B1 AS-i Emniyet Sistemi
AZM 161 Z ST2-AS RIP ED/TU-B1 — Schmersal AS-i Emniyet Sistemi. Başlıca özellikler: Çalışma Prensibi: electromechanical; IP Koruma Sınıfı: IP67; Ortam Sıcaklığı: -25 ... +60 °C | -30 ... +60 °C; Sensör Uzunluğu: 30 mm; Sensör Genişliği: 130 mm. Ürün numarası: 103047212. Fiyat ve teslim süresi için teklif isteyebilirsiniz; teknik veriler ve belgeler aşağıdadır.
Ürün Açıklaması
- • IP: IP67
- • Ağırlık: 496 g
- • Sertifika: cULus, ASi-SaW cULus
Standartlar
- • EN IEC 61508
- • EN IEC 62026-2
- • EN ISO 13849-1
- • EN IEC 60947-5-1
Ürün Özellikleri
- • Solenoid interlock
- • Thermoplastic enclosure
- • Yüksek tutma kuvveti 2000 N
- • Interlock with protection against incorrect locking.
- • Double-insulated
- • Long life
- • Integrated AS-Interface
Teknik Özellikler
EPLAN
Yes
PIN 1
AS-i +
PIN 2
Yardımcı - (P)
PIN 3
AS Arayüzü -
PIN 4
Yardımcı + (P)
Montaj
Screws
Kategori
3 | 1
Genel Not
Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened
PFH value
1.01 x 10⁻⁷ /h | 1.14 x 10⁻⁶ /h
Traceparts
Yes
Fuse rating
4 A
AS-i Profile
S-7.B.F.E
AS-i Version
V 2.1
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
AS-i, ID-Code
0xB
AS-i, IO-Code
0x7
Darbe Dayanımı
30 g / 11 ms
AS-i, ID-Code1
0xF
AS-i, ID-Code2
0xE
Emergency exit
Yes
Görev Süresi
20 Year(s)
Latching force
30 N | 5 / 30 N
Manual release
Yes
Net Ağırlık
496 g
Bağlantı Tipi
Connector plug M12, 4-pole, (A-coding)
Power to unlock
Yes
Brüt Ağırlık
496 g
Gövde Malzemesi
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Note (PFH-value)
maksimuma kadar 100.000 anahtarlama döngüsü/yıl
Protection class
II
Kirlenme Derecesi
3
Operating voltage
24 VDC -15 % / +10 % (stabilised PELV power supply)
Relative humidity
30 ... 95 %
Scope of delivery
Actuator must be ordered separately.
Sensör Uzunluğu
30 mm
Titreşim Dayanımı
10 … 150 Hz, genlik 0.35 mm
AS-i Outputs, DO 0
Solenoid control
AS-i Outputs, DO 1
No Function
AS-i Outputs, DO 2
No Function
AS-i Outputs, DO 3
No Function
AS-i Specification
Safety-Slave
Connector position
Right
Current consumption
500 mA
IP Koruma Sınıfı
IP67
Note voltage AUX DC
stabilised PELV power supply
Ortam Sıcaklığı
-25 ... +60 °C | -30 ... +60 °C
Performans Seviyesi
e | c | d
Sensör Genişliği
130 mm
Çalışma Prensibi
electromechanical
Mekanik Ömür (min.)
1 000 000
Sensör Yüksekliği
90 mm
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Note (Emergency exit)
For cases of danger | Actuation from within the hazardous area
AS-i Device protection
Internal short-circuit proof
Reaction time, maximum
100 ms
AS-i Parameter bits, P0
Aktüatör algılandı
AS-i Parameter bits, P1
Solenoid kilit kilitli
AS-i Parameter bits, P2
Magnet voltage in tolerance range
AS-i Parameter bits, P3
Hata mesajı - solenoid kilitlemenin kilitlenmesi/kilidinin açılması engellendi
Maks. Aktüasyon Hızı
2 m/s
Min. Ortam Sıcaklığı
-25 °C
Note (Performance Level)
Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions.
Note (Relative humidity)
non-condensing | non-icing
AS-i Input module address
0
Maks. Ortam Sıcaklığı
+60 °C
Type of the fixing screws
3x M6
Relative humidity, maximum
95 %
Relative humidity, minimum
30 %
Aşırı Gerilim Kategorisi
3 | III
Holding force Fmax, maximum
2 600 N
Maks. Anahtarlama Frekansı
1 000 /h
Nominal Çalışma Voltajı
24 VDC | 26.5 ... 31.6 VDC (Protection against polarity reversal)
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF) | FID: periphery error
Solenoid interlock monitored
Yes
Note (AS-i Operating voltage)
Protection against polarity reversal
Note (application conditions)
removable guard | hinged safety guard | sliding safety guard
Darbe Dayanım Gerilimi (Uimp)
0.8 kV
Number of actuating directions
3
AS-i Operating voltage, minimum
26.5 VDC
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
AS-i Current consumption, maximum
100 mA
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C | -25 ... +85 °C
Nominal Yalıtım Gerilimi (Uᵢ)
32 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
Integral system diagnostics, status
Yes
Protection class (Operating resource)
2
Coding level according to EN ISO 14119
High
Note (LED switching conditions display)
(3) LED yellow: Channel 1 / AS-i SaW Bit 0.1 | (1) LED yellow: Channel 2 / AS-i SaW Bit 2.3 | (2) LED green/red (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected
Actuating play in direction of actuation
5.5 mm
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Holding force FZh in accordance with EN ISO 14119
2 000 N
Permissible installation altitude above sea level, maximum
2 000 m
Safety Integrity Level (SIL), suitable for applications in
1 | 2