Not
Torx T10 | All indications including the conductor ferrules. | Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit.
Montaj
Screws
Kategori
3 | 1
Unlocking
Rotating unlatcher
Kablo Kesiti
0.75 mm² ... 1 mm²(All indications including the conductor ferrules.) | 0.25 mm² ... 0.75 mm² (All indications including the conductor ferrules.)
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Strip length
6 mm
Kablo Girişi
1 x M20 x 1,5
Görev Süresi
20 Year(s)
Latching force
5 / 30 N | 5 N
Manual release
Yes
Net Ağırlık
340 g
Power to unlock
Yes
Brüt Ağırlık
340 g
Gövde Malzemesi
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Kontak Malzemesi
Gold-plated silver (AgNi 15 + Au 0,3µm)
Protection class
II
Kirlenme Derecesi
3
Min. Kablo Kesiti
0.25 mm²
Scope of delivery
Actuator must be ordered separately. | Slot sealing plugs
Sensör Uzunluğu
30 mm
Maks. Kablo Kesiti
1.5 mm²
Çalışma Akımı
4 000 mA
IP Koruma Sınıfı
IP67
Ortam Sıcaklığı
-25 ... +60 °C | -30 ... +60 °C
Performans Seviyesi
c | d
Sensör Genişliği
108 mm
Termal Test Akımı
6 A
Çalışma Prensibi
electromechanical
Anahtarlama Elemanı
1 NO contact, 2 NC contacts
Anahtarlama Prensibi
slow action, positive break NC contact
Mekanik Ömür (min.)
1 000 000
Sensör Yüksekliği
100.5 mm
Allowed type of cable
solid single-wire | solid multi-wire | flexible
Magnet switch-on time
100 %
Maks. Sigorta Değeri
6 A gG D-fuse
Note (Manual release)
Additional manual release on side | right | For manual release using M5 triangular key, available as accessory
Positive break travel
11 mm
Rated control voltage
24 VAC/DC
Terminal Bağlantısı
Screw terminals
Maks. Aktüasyon Hızı
2 m/s
Tool for the connection
SL
Min. Ortam Sıcaklığı
-25 °C
Note (Relative humidity)
non-condensing | non-icing
Note (Switching element)
Change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges
Güvenlik Kontak Sayısı
2 | 1 / 2 / 3 / 4
Maks. Ortam Sıcaklığı
+60 °C
Type of the fixing screws
2x M4
Kullanım Kategorisi DC-13
24 VDC / 4 A / Screw terminals | 24_4 | 24 VDC / 4 A
Yardımcı Kontak Sayısı
1 / 2 | 1
Aşırı Gerilim Kategorisi
III
Holding force Fmax, maximum
1 300 N
Maks. Anahtarlama Frekansı
1 000 /h
Nominal Çalışma Voltajı
24 VDC
Wire cross-section, maximum
16 AWG
Wire cross-section, minimum
24 AWG
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Note (application conditions)
removable guard | hinged safety guard | sliding safety guard
Positive break force, minimum
17 N
Darbe Dayanım Gerilimi (Uimp)
4 kV
Number of actuating directions
2
B10D Normally-open contact (NO)
1 000 000
B10D Normally-closed contact (NC)
2 000 000
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C | -25 ... +85 °C
Nominal Yalıtım Gerilimi (Uᵢ)
250 VAC
Current, Utilisation category DC-13
4 A
Gerekli Nominal Kısa Devre Akımı
1 000 A
Voltage, Utilisation category DC-13
24 VDC
Electrical power consumption, maximum
12 W
Protection class (Operating resource)
2
Coding level according to EN ISO 14119
Low
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Positive break force per NC contact, minimum
8.5 N
Cable cross-section of the cable glands, maximum
10 mm
Cable cross-section of the cable glands, minimum
4 mm
Holding force FZh in accordance with EN ISO 14119
1 000 N
Tightening torque of electrical connection, maximum
0.6 Nm
Tightening torque of electrical connection, minimum
0.4 Nm
Permissible installation altitude above sea level, maximum
2 000 m
Tightening torque of the fastening screws for the housing cover, maximum
1 Nm
Tightening torque of the fastening screws for the housing cover, minimum
0.7 Nm