Sipariş No
153048817
Sertifikalar
cULus TÜV TÜV, cULus, CCC
Schmersal
Emniyetli Anahtarlama ve Denetleme
Solenoid Kilitler
AZM150B-ST-10/02RA-024 Solenoid Kilitler
AZM150B-ST-10/02RA-024 — Schmersal Solenoid Kilitler. Başlıca özellikler: Çalışma Prensibi: electromechanical; Anahtarlama Prensibi: slow action, positive break NC contact; Anahtarlama Elemanı: Magnet: 1 NO contact / Actuator: 2 NC contacts; IP Koruma Sınıfı: IP67 | IP65; Ortam Sıcaklığı: -25 ... +55 °C. Ürün numarası: 153048817. Fiyat ve teslim süresi için teklif isteyebilirsiniz; teknik veriler ve belgeler aşağıdadır.
Ürün Açıklaması
- • IP: IP65
- • Ağırlık: 650 g
- • Sertifika: cULus TÜV TÜV, cULus, CCC
Standartlar
- • EN IEC 60947-5-1
- • EN ISO 13849-1
- • EN ISO 14119
Ürün Özellikleri
- • konnektör fişi M12, 8 kutuplu
- • Eight approach levels thanks to rotating head
- • Özellikle 40 mm profillere kolay montaj
- • Thermoplastic enclosure
Teknik Özellikler
Not
Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit.
EPLAN
Yes
Montaj
Screws
CADENAS
Yes
Kategori
3 | 1
Genel Not
Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened
Traceparts
Yes
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Power to lock
Yes
Görev Süresi
20 Year(s)
Manual release
Yes
Net Ağırlık
650 g
Property class
8.8
Brüt Ağırlık
650 g
Gövde Malzemesi
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Kontak Malzemesi
Silver
Protection class
III
Kirlenme Derecesi
2
Scope of delivery
Slot cover for dust-proof covering of the opening not in use
Sensör Uzunluğu
48 mm
IP Koruma Sınıfı
IP67 | IP65
Ortam Sıcaklığı
-25 ... +55 °C
Performans Seviyesi
c | d
Sensör Genişliği
40 mm
Termal Test Akımı
2 A
Çalışma Prensibi
electromechanical
Anahtarlama Elemanı
Magnet: 1 NO contact / Actuator: 2 NC contacts
Anahtarlama Prensibi
slow action, positive break NC contact
Mekanik Ömür (min.)
1 000 000
Sensör Yüksekliği
204 mm
Magnet switch-on time
100 %
Maks. Sigorta Değeri
6 A gG D-fuse to DIN EN 60269-1
Positive break travel
5 mm
Rated control voltage
24 VDC
Terminal Bağlantısı
Connector plug M12, 8-pole, A-coded
Latching force, approx.
50 N
Maks. Aktüasyon Hızı
0.3 m/s
Min. Ortam Sıcaklığı
-25 °C
Note (Relative humidity)
non-condensing | non-icing
Note (Switching element)
galvanically separated contact bridges
Güvenlik Kontak Sayısı
2 / 3 / 4
Maks. Ortam Sıcaklığı
+55 °C
Type of the fixing screws
4x M5
Integrated connection, M12
Yes
Kullanım Kategorisi DC-13
24_2_FMAW00000001 | 24 VDC / 2 A / Connector 8-pole
Note (Mechanical lifetime)
from device version V2 (see type plate)
Relative humidity, maximum
93 %
Yardımcı Kontak Sayısı
1 / 2
Aşırı Gerilim Kategorisi
II
Holding force Fmax, maximum
1 950 N
Maks. Anahtarlama Frekansı
1 000 /h
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Material of the latching bolt
Stainless steel (1.4104)
Note (application conditions)
removable guard | hinged safety guard | sliding safety guard
Number of actuating directions
2
B10D Normally-open contact (NO)
1 000 000
Note, Utilisation category DC-13
Connector 8-pole
B10D Normally-closed contact (NC)
2 000 000
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C
Nominal Yalıtım Gerilimi (Uᵢ)
30 V
Current, Utilisation category DC-13
2 A
Gerekli Nominal Kısa Devre Akımı
1 000 A
Voltage, Utilisation category DC-13
24 VDC
Electrical power consumption, maximum
8.5 W
Protection class (Operating resource)
3
Coding level according to EN ISO 14119
Low
Material of the connector (electrical)
Metal
Tightening torque of the fixing screws
1.3 ... 1.5 Nm
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Positive break force per NC contact, minimum
10 N
Tightening torque of the fixing screws, maximum
1.5 Nm
Tightening torque of the fixing screws, minimum
1.3 Nm
Holding force FZh in accordance with EN ISO 14119
1 500 N
Rated impulse withstand voltage, connector 8-pole
0.8 kV
Tightening torque of the fastening screws for the housing cover
0.5 Nm