Not
Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit.
PIN 1
11 actuator contact
PIN 2
12 actuator contact
PIN 3
21 1st solenoid contact
PIN 4
22 1st solenoid contact
PIN 5
31 2nd solenoid contact
PIN 6
32 2nd solenoid contact
PIN 7
E1 Ue
PIN 8
E2 GND
Montaj
Screws
Kategori
3 | 1
Genel Not
Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened
Connection
Connector plug M12, 8-pole, A-coded
Kablo Kesiti
0.5 mm² ... 1.5 mm² (All indications including the conductor ferrules.)
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Power to lock
Yes
Görev Süresi
20 Year(s)
Latching force
20 N
Net Ağırlık
585 g
Brüt Ağırlık
585 g
Gövde Malzemesi
Glass-fibre, reinforced thermoplastic
Protection class
II
Actuator rotation
0 °
Scope of delivery
Actuator must be ordered separately.
Sensör Uzunluğu
41 mm
Çalışma Akımı
2 000 mA
IP Koruma Sınıfı
IP67
Ortam Sıcaklığı
-25 ... +55 °C
Performans Seviyesi
c | d
Sensör Genişliği
52 mm
Termal Test Akımı
2 A
Çalışma Prensibi
electromechanical
Anahtarlama Elemanı
Magnet: 2 NC contacts / Actuator: 1 NC contact
Anahtarlama Prensibi
slow action, positive break NC contact
Mekanik Ömür (min.)
1 000 000
Sensör Yüksekliği
178 mm
Magnet switch-on time
100 %
Maks. Sigorta Değeri
4 A gG D-fuse to DIN EN 60269-1
Positive break travel
3.5 mm
Rated control voltage
24 VAC/DC
Interlocking principle
Power to lock
Number of cable glands
2
Terminal Bağlantısı
Connector plug M12, 8-pole, A-coded
Traceparts, product ID
33-22052019-077278
Maks. Aktüasyon Hızı
0.3 m/s
Material of the actuator
Çinko kaplamalı metal
Min. Ortam Sıcaklığı
-25 °C
Note (Delivery capacity)
Not available!
Note (Relative humidity)
non-condensing | non-icing
Note (Switching element)
galvanically separated contact bridges
Güvenlik Kontak Sayısı
1 / 2 / 3 / 4 | 3
Maks. Ortam Sıcaklığı
+55 °C
Type of the fixing screws
2x M5
Kullanım Kategorisi AC-15
230 VAC / 4 A / Screw terminals | 230_4
Kullanım Kategorisi DC-13
24 VDC / 4 A / Screw terminals | 24_4 | 24 VDC / 4 A
Yardımcı Kontak Sayısı
1 / 2
Holding force Fmax, maximum
2 550 N
Maks. Anahtarlama Frekansı
1 200 /h
Nominal Çalışma Voltajı
24 VDC
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Material of the latching bolt
Die-cast zinc
Note (application conditions)
removable guard | hinged safety guard | sliding safety guard
Positive break force, minimum
20 N
Number of actuating directions
4
B10D Normally-open contact (NO)
1 000 000
B10D Normally-closed contact (NC)
2 000 000
Nominal Yalıtım Gerilimi (Uᵢ)
30 V
Current, Utilisation category AC-15
2 A
Current, Utilisation category DC-13
2 A
Gerekli Nominal Kısa Devre Akımı
1 000 A
Voltage, Utilisation category AC-15
230 VAC
Voltage, Utilisation category DC-13
24 VDC
Electrical power consumption, maximum
8.5 W
Protection class (Operating resource)
2
Coding level according to EN ISO 14119
Low
Holding force FZh in accordance with EN ISO 14119
1 950 N
Rated impulse withstand voltage, connector 8-pole
0.8 kV