Sipariş No
101179105
Schmersal
Emniyetli Anahtarlama ve Denetleme
Emniyet Konum Şalterleri (PS Serisi)
AZR31S1-2SEC./230VAC Emniyet Konum Şalterleri (PS Serisi)
AZR31S1-2SEC./230VAC — Schmersal Emniyet Konum Şalterleri (PS Serisi). Başlıca özellikler: Gövde Malzemesi: Glass-fibre, reinforced thermoplastic; Ortam Sıcaklığı: -25 ... +45 °C; Depth: 121 mm; Montaj: Snaps onto standard DIN rail to EN 60715; Genişlik: 45 mm. Ürün numarası: 101179105. Fiyat ve teslim süresi için teklif isteyebilirsiniz; teknik veriler ve belgeler aşağıdadır.
Ürün Açıklaması
- • Ağırlık: 400 g
Standartlar
- • EN IEC 60947-5-3
- • EN IEC 61508
- • EN IEC 60947-5-5
- • EN IEC 60947-5-1
- • EN IEC 60204-1
- • EN IEC 60947-1
- • EN ISO 13849-1
- • EN IEC 62061
Ürün Özellikleri
- • Arıza korumalı durma monitörleri
- • E.m.f.'nin izlenmesiyle durmanın sensörsüz tespiti.
- • Üç fazlı motorlara doğrudan bağlantı
- • Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
- • Bu arıza korumalı durma monitörü, devreye alma sırasında gerekli değer için herhangi bir ayarlama gerekmemesi gibi özel bir avantaja sahiptir.
- • 3 safety contacts, STOP 0
- • 1 Signalling output
Teknik Özellikler
Depth
121 mm
Montaj
Snaps onto standard DIN rail to EN 60715
Genel Not
Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.
Genişlik
45 mm
PFH value
2.00 x 10⁻⁸ /h
EMC rating
EMC-Directive
Yükseklik
73.2 mm
Kablo Kesiti
0.25 mm² ... 2.5 mm²
Voltage type
AC
Darbe Dayanımı
30 g / 11 ms
Stop-Category
0
Görev Süresi
20 Year(s)
Net Ağırlık
400 g
Number of LEDs
5
Bağlantı Tipi
rigid or flexible | Screw terminals M20 x 1.5
Climatic stress
EN 60068-2-78
Frequency range
50 Hz | 60 Hz
Brüt Ağırlık
400 g
Category, Stop 0
4
Feedback circuit
Yes
Gövde Malzemesi
Glass-fibre, reinforced thermoplastic
Kontak Malzemesi
AgSn0. kendi kendini temizleyen, pozitif tahrikli
Kirlenme Derecesi
2
Min. Kablo Kesiti
0.25 mm²
Operating voltage
230 VAC -15 % / +10 %
Titreşim Dayanımı
10 ... 55 Hz, Genlik 0.35 mm
Maks. Kablo Kesiti
2.5 mm²
Ortam Sıcaklığı
-25 ... +45 °C
Mekanik Ömür (min.)
10 000 000
Note (Wiring diagram)
After release has taken place, the guard door must be opened. | Monitoring the guard door using a solenoid interlock and a safety switch with separate actuator (A and B). | Release takes place by means of the NO contact (E) only when the run-down movement has been terminated. | The SRB range guard door monitor checks the position of the guard door. | To secure a guard door | The sensor-free standstill monitor checks the e.m.f. of the three phase motor. | The wiring diagram is shown with guard doors closed and in de-energised condition.
Terminal designations
IEC/EN 60947-1
Cross-circuit detection
Yes
Wire breakage detection
Yes
Automatic reset function
Yes
Min. Ortam Sıcaklığı
-25 °C
Note (Delivery capacity)
Not available!
Güvenlik Kontak Sayısı
3
Maks. Ortam Sıcaklığı
+45 °C
Note (Contact resistance)
in new state
Earth connection detection
Yes
Indicated operating states
OUT, green: release | ON, green: supply voltage UB | ERR, red: error channel A + B
Tightening torque of Clips
0.6 Nm
Utilisation category DC-12
24_0.1
Yardımcı Kontak Sayısı
1
Aşırı Gerilim Kategorisi
III
Contact resistance, maximum
0.1 Ω
Nominal Çalışma Voltajı
230 VAC | 230 VAC -15% / +10%
Switching capacity, maximum
250 VAC | 2 A | 24 VDC | 8 A
Switching capacity, minimum
10 VDC | 10 mA
Note (application conditions)
safe standstill monitoring
Conduction resistance, maximum
40 Ω
Darbe Dayanım Gerilimi (Uimp)
4 kV
Performance Level, stop 0, up to
e
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C
Pull-in delay at RESET, typically
20 ms
Common Cause Failure (CCF), minimum
65
Current, Utilisation category AC-15
6 A
Current, Utilisation category DC-12
0.1 A
Current, Utilisation category DC-13
6 A
Integral system diagnostics, status
Yes
Voltage, Utilisation category AC-15
230 VAC
Voltage, Utilisation category DC-12
24 VDC
Voltage, Utilisation category DC-13
24 VDC
Cable length (Master/Slave), maximum
10 m
Electrical power consumption, maximum
4 VA
Diagnostic Coverage (DC) Level, Stop 0
≥ 99 %
IP Degree of protection of the enclosure
IP40
Rated control voltage at AC 50 Hz, maximum
253 VAC
Rated control voltage at AC 60 Hz, maximum
253 VAC
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
IP Degree of protection of clips or terminals
IP20
Rated AC voltage for controls, 50 Hz, minimum
195.5 VAC
Rated AC voltage for controls, 60 Hz, minimum
195.5 VAC
Drop-out delay in case of emergency, typically
20 ms
IP Degree of protection of the installation space
IP54
Drop-out delay in case of power failure, typically
80 ms
Drop-out delay in case of "emergency stop", maximum
15 ms
Safety Integrity Level (SIL), Stop 0, suitable for applications in
3
Pull-in delay at automatic start (after detecting standstill), approx.
2 000 ms