Sipariş No
101210879
Schmersal
Emniyetli Anahtarlama ve Denetleme
Emniyet Konum Şalterleri (PS Serisi)
BN 120L-RZ 2,0M Emniyet Konum Şalterleri (PS Serisi)
BN 120L-RZ 2,0M — Schmersal Emniyet Konum Şalterleri (PS Serisi). Başlıca özellikler: Çalışma Prensibi: Magnetic drive; Anahtarlama Prensibi: Latching; Gövde Malzemesi: Glass-fibre, reinforced thermoplastic; IP Koruma Sınıfı: IP67; Ortam Sıcaklığı: -25 ... +70 °C. Ürün numarası: 101210879. Fiyat ve teslim süresi için teklif isteyebilirsiniz; teknik veriler ve belgeler aşağıdadır.
Ürün Açıklaması
- • IP: IP67
- • Ağırlık: 70 g
Ürün Özellikleri
- • Actuation from side
- • önyargı mıknatıslı
- • Non-contact principle
- • Long life
- • Thermoplastic enclosure
- • Actuating distance up to 60 mm depending on actuating magnet and version
- • Tasarım Ø 10.7 mm
- • merkezi montajlı
- • Önceden kablolu kabloyla
Teknik Özellikler
Montaj
central with threated flange M12 x 1
Latching
Yes
Genel Not
The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm. | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. | When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.
Cable type
LiYY
Active area
lateral
bias magnet
Yes
Darbe Dayanımı
30 g / 11 ms
Net Ağırlık
70 g
Bağlantı Tipi
Pre-wired cable
Length of cable
2 m
Brüt Ağırlık
70 g
Gövde Malzemesi
Glass-fibre, reinforced thermoplastic
Repeat accuracy R
0.3 mm
Scope of delivery
Actuator must be ordered separately.
Sensör Uzunluğu
102 mm
Titreşim Dayanımı
10 … 55 Hz, genlik 1 mm
Diameter of sensor
10.7 mm
Wire cross-section
0.25 mm² | 23 AWG
width across flats
17 BK
Aktüasyon Elemanı
Mıknatıs
IP Koruma Sınıfı
IP67
Ortam Sıcaklığı
-25 ... +70 °C
Çalışma Prensibi
Magnetic drive
Anahtarlama Prensibi
Mandallı
Mekanik Ömür (min.)
10 000 000
Number of cable wires
2
Switching distance Sn
2 x BP 11N = 25 mm | 2 x BP 11S = 25 mm | 2 x BP 10N = 20 mm | BP 12S = 20 mm | BP 31N = 25 mm | BP 20N = 25 mm | BP 34N = 10 ... 30 mm | 2 x BP 10S = 20 mm | 2 x BP 21S = 20 ... 60 mm | BP 34S = 15 ... 30 mm | BP 31S = 25 mm | BP 20S = 25 mm | 2 x BP 21N = 20 ... 60 mm | BP 10S = 15 mm | BP 11S = 15 mm | BP 21N = 15 ... 45 mm | BP 11N = 15 mm | BE 20N = 20 mm | 2 x BP 15/2N = 22 mm | 2 x BP 15/2S = 22 mm | BP 15N = 17 mm | 2 x BP 12S = 10 ... 30 mm | BP 12N = 20 mm | 15 mm … 60 mm | BP 10N = 15 mm | BE 20S = 20 mm | BP 15S = 17 mm | BP 21S = 15 ... 45 mm | 2 x BP 12N = 10 ... 30 mm
Suitable for elevators
Yes
Maks. Aktüasyon Hızı
18 m/s
Min. Ortam Sıcaklığı
-25 °C
Note (Delivery capacity)
Not available!
Housing construction form
Cylinder, thread
Maks. Ortam Sıcaklığı
+70 °C
Note (switching distance)
All switching distances in accordance EN IEC 60947-5-2
Recommendation (actuator)
BP 12 N | BP 21 N | 2x BP 10 S | 2x BP 11 S | 2x BP 10 N | BP 20 S | BP 12 S | BE 20 N | BP 31 S | BP 20 N | BP 11 N | BP 10 N | BP 10 S | 2x BP 21 N | 2x BP 12 S | BP 34 N | 2x BP 11 N | BP 21 S | BP 11 S | 2x BP 15/2 S | BP 15 N | BP 15 S | BP 34 S | BE 20 S | 2 x BP 15/2 N | BP 31 N | 2x BP 21 S | 2x BP 12 N
Number of snap-in contacts
1
Switching current, maximum
1 A
Switching voltage, maximum
200 VDC | 200 VAC
Switching capacity, maximum
30 VA | 30 W
Material of the Cable mantle
PVC
Note (Switching distance Sn)
Actuating distance up to 60 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or n
Tightening torque of nuts, maximum
0.9 Nm
Recommendation (actuator, lift switchgear)
2 x BP 15 | BP 10 | 2 x BP 15/2 | 2 x BP 10 | BP 15 | BP 34