EPLAN
Yes
PIN 1
24 VDC
PIN 2
Input red RGB-LED
PIN 3
GND
PIN 4
Normally open contact (illuminated button)
PIN 5
Input green RGB-LED
PIN 6
Input blue RGB-LED
PIN 7
NK
PIN 8
Input LED (in illuminated button)
CADENAS
Yes
Uzunluk
202 mm
Genişlik
40 mm
Traceparts
Yes
Yükseklik
84 mm
Illuminable
Yes
Darbe Dayanımı
30 g / 11 ms (EN 60947-5-2)
Cable diameter
5.5 mm
Net Ağırlık
287 g
Bağlantı Tipi
Connecting cable with M12 connector, straight, 8-pole
Length of cable
0.25 m
Actuating stroke
1 mm
Brüt Ağırlık
287 g
Gövde Malzemesi
Glass-fibre, reinforced thermoplastic
Protection class
III
Kirlenme Derecesi
3
Operating voltage
24 VDC -15 % / +10 %
Scope of delivery
The push button caps (blue, green, red, white, yellow) are included in the scope of delivery.
Titreşim Dayanımı
10 … 150 Hz, genlik 0.35 mm (EN 60947-5-2)
Çalışma Akımı
150 mA
IP Koruma Sınıfı
IP66 | IP67
Ortam Sıcaklığı
-25 ... +45 °C | -40 ... +75 °C
Note Bounce duration
100 mm/s'lik Çalıştırma hızında sıçrama süresi
Bending radius (fixed)
5 x Ø-cable
Material of the handle
translucent PMMA
Material of the holder
Glass-fibre, reinforced thermoplastic
Actuating force, maximum
10 N
Bounce duration, maximum
2 ms
Min. Ortam Sıcaklığı
-25 °C
Note (Relative humidity)
non-condensing | non-icing
Bending radius (repeated)
10 x Ø-cable
Maks. Ortam Sıcaklığı
+45 °C
Type of the fixing screws
2x M6
Current consumption at 24V
5 mA
Idle assignable pushbutton
Yes
Kullanım Kategorisi DC-13
0.03 A | 24 VDC
Relative humidity, maximum
93 %
Utilisation category DC-12
24 VDC | 0.03 A
Aşırı Gerilim Kategorisi
III
Maks. Anahtarlama Frekansı
1 000 /h
Nominal Çalışma Voltajı
24 VDC
Inputs, Switching thresholds
−3 V … 5 V (Low) | 11 V … 30 V (High)
Material of the Cable mantle
PUR
Darbe Dayanım Gerilimi (Uimp)
0.8 kV
Tightening torque of the screw
3.5 Nm
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C
Nominal Yalıtım Gerilimi (Uᵢ)
32 VDC
Current consumption inidcator lamp
30 mA
Gerekli Nominal Kısa Devre Akımı
100 A
External wire and device fuse rating
2 A gG | 2 A gG (Connecting cable with M12 connector, straight, 8-pole)
Mechanical lifetime, Command devices
1 000 000
Note (scope of delivery, number and type)
The insert for use with the safety sensor RSS260 or without integrated actuator must be ordered separately.
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Typical actuating force of the push button
10 N
Type of mounting screws for the handle body
2x Torx Plus T20x25
Colour of the illuminated push button calotte
Blue | Yellow | Red | White | Green
Tightening torque of mounting screws for the handle body
2.5 Nm
Permissible installation altitude above sea level, maximum
3 000 m