Sipariş No
103049429
Sertifikalar
ATEX (Konformitätserklärung)
Schmersal
Ex / ATEX Anahtarlama Cihazları
Solenoid Kilitler
EX-AZM 170-11ZRK-P-3GD Solenoid Kilitler
EX-AZM 170-11ZRK-P-3GD — Schmersal Solenoid Kilitler. Başlıca özellikler: Çalışma Prensibi: electromechanical; Anahtarlama Prensibi: Slow action; Anahtarlama Elemanı: NO contact, NC contact; IP Koruma Sınıfı: IP67; Ortam Sıcaklığı: -15 ... +45 °C. Ürün numarası: 103049429. Fiyat ve teslim süresi için teklif isteyebilirsiniz; teknik veriler ve belgeler aşağıdadır.
Ürün Açıklaması
- • IP: IP67
- • Ağırlık: 1 100 g
- • Sertifika: ATEX (Konformitätserklärung)
Standartlar
- • EN IEC 60947-5-1
- • EN ISO 13849-1
Ürün Özellikleri
- • IDC sonlandırma yöntemi
- • Explosion protection for ATEX Zones 2 and 22
- • 1 Cable entry M 20 x 1.5
- • Interlock with protection against incorrect locking.
- • High holding force
- • 90 mm x 84 mm x 30 mm
Teknik Özellikler
Not
Electrical life on request. | for 2-channel use and with suitable logic unit.
Montaj
Screws
CADENAS
Yes
Uzunluk
38 mm
Kategori
3 | 1
Genel Not
This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules
Genişlik
140 mm
Traceparts
Yes
Yükseklik
88 mm
Kablo Kesiti
1 mm² ... 2 mm²
Görev Süresi
20 Year(s)
Latching force
30 N | 5 / 30 N
Manual release
Yes
Net Ağırlık
1 100 g
Bağlantı Tipi
IDC method of termination
Power to unlock
Yes
Brüt Ağırlık
1 100 g
Gövde Malzemesi
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Kontak Malzemesi
Silver
Min. Kablo Kesiti
2 x 1.0 mm², esnek
Scope of delivery
Actuator must be ordered separately. | The protective housing is included in the scope of delivery. | Including Ex-certified screwed cable gland and screw plug
Maks. Kablo Kesiti
1 x 1 mm², esnek
IP Koruma Sınıfı
IP67
Ortam Sıcaklığı
-15 ... +45 °C
Performans Seviyesi
e | c | d
Termal Test Akımı
2 A
Çalışma Prensibi
electromechanical
Anahtarlama Elemanı
NO contact, NC contact
Anahtarlama Prensibi
Slow action
Mekanik Ömür (min.)
1 000 000
Utilisation category
AC-15 | DC-13
Allowed type of cable
solid single-wire | flexible
Magnet switch-on time
100 %
Maks. Sigorta Değeri
6 A gG D-fuse
Note (Manual release)
bottom | For manual release using M5 triangular key, available as accessory
Positive break travel
11 mm
Rated control voltage
24 VDC | 24 VAC
Impact energy, maximum
7 J
Type of the screw head
Flat head screw
Maks. Aktüasyon Hızı
1 m/s
Manufacturer declaration
ATEX Zone 2 and 22
Min. Ortam Sıcaklığı
-15 °C
Note (Performance Level)
Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions.
Note (Relative humidity)
non-condensing | non-icing
Güvenlik Kontak Sayısı
1 | 1 / 2
Maks. Ortam Sıcaklığı
+45 °C
Explosion protection zones
22 | 2
Kullanım Kategorisi AC-15
2 A | 230 VAC
Kullanım Kategorisi DC-13
24 VDC | 2 A | 24 VDC / 2 A
Yardımcı Kontak Sayısı
1
Holding force Fmax, maximum
1 300 N
Maks. Anahtarlama Frekansı
1 000 /h
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Explosion protection category
3G | 3D
Positive break force, minimum
8.5 N
Darbe Dayanım Gerilimi (Uimp)
4 kV
B10D Normally-open contact (NO)
1 000 000
Explosion protection designation
D II 3D Ex tc IIIC T80°C Dc X | D II 3G Ex nC IIB T5 Gc X
B10D Normally-closed contact (NC)
2 000 000
Explosion protection: regulations
EN IEC 60079-0 | EN IEC 60079-15 | EN 60079-31
Nominal Yalıtım Gerilimi (Uᵢ)
250 VAC
Tightening torque of the cable gland
4.5 Nm
Electrical power consumption, maximum
10 W
Coding level according to EN ISO 14119
Low
Cable cross-section of the cable glands
6.5 ... 12 mm
Cable cross-section of the cable glands, maximum
12 mm
Cable cross-section of the cable glands, minimum
6.5 mm
Holding force FZh in accordance with EN ISO 14119
1 000 N
Tightening torque of the fastening screws for the housing cover, maximum
0.5 Nm
Tightening torque of the fastening screws for the housing cover, minimum
0.4 Nm