Not
Diameter backing plate 100 mm | All indications including the conductor ferrules.
EPLAN
Yes
Montaj
central nut
Toggle
long
CADENAS
Yes
Uzunluk
72 mm
Diameter
100 mm
Latching
Yes
Tasarım
Large marking plate
Unlocking
Rotating unlatcher
Traceparts
Yes
Yükseklik
114 mm
Versiyonlar
Main switch 40 A | Front plate mounting
Kablo Kesiti
1 mm² ... 10 mm²(All indications including the conductor ferrules.)
Voltage type
AC
Darbe Dayanımı
<50 g (EN 60068-2-27)
Görev Süresi
20 Year(s)
Mounting depth
77 mm
Net Ağırlık
220 g
Climatic stress
DIN IEC 60068-2-78 | DIN IEC 60068-2-30
Mounting height
32 mm
Brüt Ağırlık
220 g
Latching position
right
Min. Kablo Kesiti
0.75 mm², flexible | 1 mm², rigid
Mounting diameter
22.3 mm
Titreşim Dayanımı
5 g
Maks. Kablo Kesiti
6 mm², flexible | 10 mm², rigid
Wire cross-section
8 AWG
IP Koruma Sınıfı
IP69K | IP67
Notes (front plate)
Including identification plate
Ortam Sıcaklığı
+0 ... +80 °C | +0 ... +75 °C
Termal Test Akımı
40 A
Anahtarlama Prensibi
Slow action
Colour of the handle
Red
Length of the handle
52.5 mm
Mekanik Ömür (min.)
100 000
Sızdırmazlık Tipi
Membrane | Lip gaskets
Colour of the bellows
Blue
Colour of the bracket
Silver
Colour of the sealing
Blue
Maks. Sigorta Değeri
40 A gL Sicherung
Note (Mounting depth)
Anahtar bloğu dahil ön panelin arkasındaki derinlik
Material of the toggle
ABS
Note (Mounting height)
Height in front of the front panel.
Switching angle, right
90 °
Terminal Bağlantısı
Screw terminals
Anti-torsion protection
Yes
Material of the bracket
Stainless steel (V4A)
Number of main contacts
3
Colour of the front ring
Silver
Min. Ortam Sıcaklığı
+0 °C
Note (Relative humidity)
non-condensing | non-icing
Switching capacity, AC-3
11 000 W
Lockable neutral position
Yes
Maks. Ortam Sıcaklığı
+80 °C
Switching capacity, AC-23
15 000 W
Diameter of the front ring
45 mm
Material of the front ring
Stainless steel (V4A)
Mekanik Montaj Koşulları
all surfaces min 3° to the horizontal
Number of switch positions
1
Relative humidity, maximum
93 %
Tightening torque of Clips
2.5 Nm
Colour of the marking plate
Yellow
Nominal Çalışma Voltajı
690 VAC
Colour of the Contact element
Black
Material of the marking plate
Stainless steel (V4A)
Note (application conditions)
Main switch as emergency stop version with red toggle and yellow plate | Disconnect Switch, Product line H200, Type series H233, 3 pole ON-OFF switch, Front mounting switch
Thickness, of the front panel
1.5 ... 6 mm
Darbe Dayanım Gerilimi (Uimp)
6 kV
Mounting position main contacts
0°
Depolama / Taşıma Sıcaklığı
+0 ... +80 °C
Tightening torque of nuts, maximum
4 Nm
Gerekli Nominal Kısa Devre Akımı
15 000 A
Thickness of the front panel, maximum
6 mm
Thickness, of the front panel, minimum
1.5 mm
Note (scope of delivery, number and type)
Scope of delivery with contact carrier SMF-SG | without strengthening plate, with marking plate
Storage and transport temperature, maximum
+80 °C
Storage and transport temperature, minimum
+0 °C
Ambient temperature, switch element, maximum
open +50 °C | encapsulated +40 °C
Ambient temperature, switch element, minimum
encapsulated -25 °C | open -25 °C
Permissible installation altitude above sea level, maximum
2 000 m