Order No
103030679
Certificates
TÜV CCC TÜV,
Schmersal
Elevator Key Switch
Door Locking Devices
AV15RKX11.5U-GB215 Door Locking Devices
AV15RKX11.5U-GB215 — Schmersal Door Locking Devices. Key specifications: Switching principle: Slow action; Switching element: NC contact, NO contact; Housing Material: Light alloy die-casting; IP protection class: IP20; Ambient Temperature: -15 ... +70 °C. Article number: 103030679. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP20
- • Ağırlık: 718 g
- • Sertifika: TÜV CCC TÜV,
Standards
- • EN 81-20
- • EN 81-50
Product Features
- • right-hand model
- • 1 Auxiliary contact
- • Fail-safe locking system
- • for 1-leaf doors
- • authorised for use in passenger elevators
- • Manual release by means of M5 triangular key
- • Aluminium die cast enclosure
Technical Specifications
Depth
36 mm
Mounting
two 9 x 11 mm slotted holes on the rear | two M8 mounting holes on the bottom, horizontal to the locking bolt
Spacing
148 mm
General note
The illustrated door lock is an example of the actuation type and shows the variant with the maximum locking bolt x-dimension of 45 mm and a 45° chamfer at the bottom of the locking bolt.
Width
165 mm
Unlocking
Rotating unlatcher
Traceparts
Yes
Height
80 mm
Cable entry
without cable gland
Manual release
Yes
Net Ağırlık
718 g
Gross weight
718 g
Housing Material
Light alloy die-casting
Contact material
Silver
Permanent magnet
Ceramic oxide magnets with high coercive field strength
Safety functions
Yes
Min. cable cross-section
1 mm²
Max. cable cross-section
1.5 mm²
Operating current
2,000 mA
Actuation Element
Pull strap
IP protection class
IP20
Ambient Temperature
-15 ... +70 °C
Conventional thermal current
10A
Switching element
NC contact, NO contact
Switching principle
Slow action
Number of door leafs
1
Utilisation category
AC-15 | DC-13
Maks. Sigorta Değeri
6 A (slow blow)
Note (Manual release)
For manual release using M5 triangular key, available as accessory
Orientation / Alignment
right-hand model
Min. Ortam Sıcaklığı
-15 °C
Note (Switching element)
galvanically separated contact bridges | with double break
Number of safety contacts
1
Maks. Ortam Sıcaklığı
+70 °C
Utilization Category AC-15
2 A | 230 VAC
Utilization Category DC-13
200 VDC / 2 A | 24 VDC | 1 A
Number of auxiliary contacts
1
Design of the latching bolt
45° bevel, from below
Nominal Çalışma Voltajı
230 VAC | 200 VDC
Diameter of the latching bolt
18 mm
Material of the latching bolt
Brass
Type of electrical connection
Screw terminals
Rated impulse withstand voltage (Uimp)
6 kV
X-dimension of the latching bolt
11.5 mm
Rated insulation voltage (Uᵢ)
400 VAC
With fail-safe locking system (Y/N)
Yes
Number of NO (Normally Open) Contacts
1
Number of NC (Normally Closed) Contacts
1
Note (X-dimension of the latching bolt)
The entire locking bolt length results from the prescribed insertion depth of the locking bolt into the door leaf of 21 mm and dimension X. Dimension X represents the distance between the bottom of the enclosure of the door closing device and the top of t