Order No
161150636
Certificates
cULus, CCC cULus TÜV
Schmersal
Safe Switching and Monitoring
Safety Switches with Separate Actuator
AZ 16-12ZIB1-M20-2177 Safety Switches with Separate Actuator
AZ 16-12ZIB1-M20-2177 — Schmersal Safety Switches with Separate Actuator. Key specifications: Working Principle: mechanical; Switching principle: slow action, positive break NC contact; Switching element: 1 NO contact, 2 NC contacts; IP protection class: IP67; Ambient Temperature: -30 ... +80 °C. Article number: 161150636. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 170 g
- • Sertifika: cULus, CCC cULus TÜV
Standards
- • EN ISO 13849-1
- • EN IEC 60947-5-1
- • EN ISO 14119
Product Features
- • 3 cable entries M 20 x 1.5
- • Thermoplastic enclosure
- • Individual coding
- • Coding level "High" according to ISO 14119
- • 52 mm x 90 mm x 30 mm
- • Long life
- • Double-insulated
- • Large wiring compartment
- • High level of contact reliability with low voltages and currents
- • Insensitive to soiling
- • Slotted holes for adjustment, circular holes for location
- • For interlocking of light, unguided guards
Technical Specifications
Note
All indications including the conductor ferrules. | Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit.
Category
3 | 1
General note
The actuator is not available separately.
Cable Cross-Section
0.75_2.5_PMAW00000660 | 0.25 mm² ... 2.5 mm²(All indications including the conductor ferrules.)
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Cable entry
3 x M20 x 1,5
Mission time
20 Year(s)
Net Ağırlık
170 g
Gross weight
170 g
Housing Material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Contact material
Silver
Pollution degree
3
Min. cable cross-section
0.75 mm²
Scope of delivery
Individually coded actuator B1 - 2177 with centering guide
Sensor length
30 mm
Max. cable cross-section
2.5 mm²
IP protection class
IP67
Ambient Temperature
-30 ... +80 °C
Performance level
c | d
Sensor width
52 mm
Conventional thermal current
10A
Working Principle
mechanical
Switching element
1 NO contact, 2 NC contacts
Switching principle
slow action, positive break NC contact
Mechanical life (min.)
1,000,000
Sensor height
90 mm
Allowed type of cable
solid single-wire | solid multi-wire | flexible
Maks. Sigorta Değeri
6 A gG D-fuse
Positive break travel
8 mm
Number of cable glands
3
Terminal connection
Screw connection
Max. actuating speed
2 m/s
Material of the actuator
Stainless steel
Min. Ortam Sıcaklığı
-30 °C
Note (Switching element)
galvanically separated contact bridges | with double break
Number of safety contacts
2 | 2 / 3
Maks. Ortam Sıcaklığı
+80 °C
Utilization Category AC-15
230 VAC / 4 A
Utilization Category DC-13
24 VDC / 4 A / Screw terminals | 24_4
Number of auxiliary contacts
1
Overvoltage category
III
Max. switching frequency
4,000 /h
Position of the cable gland
on the floor side, left and right
ACE reference article number
171710
Rated impulse withstand voltage (Uimp)
6 kV
Number of actuating directions
3
B10D Normally-open contact (NO)
1,000,000
Note, Utilisation category AC-15
Screw terminals
Note, Utilisation category DC-13
Screw terminals
B10D Normally-closed contact (NC)
2,000,000
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C
Rated insulation voltage (Uᵢ)
500 V
Current, Utilisation category AC-15
4 A
Current, Utilisation category DC-13
4 A
Required rated short-circuit current
1,000 A
Voltage, Utilisation category AC-15
230 VAC
Voltage, Utilisation category DC-13
24 VDC
Coding level according to EN ISO 14119
High
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Positive break force per NC contact, minimum
10 N
Permissible installation altitude above sea level, maximum
2,000 m