Order No
101149560
Certificates
cULus cULus, CCC
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
AZM 170-11ZKA-ST 24VAC/DC
AZM 170-11ZKA-ST 24VAC/DC — Schmersal product. Key specifications: Working Principle: electromechanical; Switching principle: slow action, positive break NC contact; Switching element: 1 NO contact, 1 NC contacts; IP protection class: IP67; Ambient Temperature: -25 ... +60 °C | -30 ... +60 °C. Article number: 101149560. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 290 g
- • Sertifika: cULus cULus, CCC
Standards
- • EN IEC 60947-5-1
- • EN ISO 13849-1
- • EN ISO 14119
- • BG-GS-ET-19
Product Features
- • connector plug M12, 4-pole
- • Power to lock
- • Thermoplastic enclosure
- • Interlock with protection against incorrect locking.
- • Long life
Technical Specifications
Note
Torx T10 | Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit.
Mounting
Screws
Category
3 | 1
Cable Cross-Section
0.75 mm² ... 1 mm²(All indications including the conductor ferrules.)
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Power to lock
Yes
Mission time
20 Year(s)
Latching force
5 / 30 N | 5 N
Net Ağırlık
290 g
Gross weight
290 g
Housing Material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Contact material
Silver
Protection class
II
Pollution degree
3
Scope of delivery
Actuator must be ordered separately. | Slot sealing plugs
Sensor length
30 mm
Connector position
Centre
Operating current
4,000 mA
IP protection class
IP67
Ambient Temperature
-25 ... +60 °C | -30 ... +60 °C
Performance level
c | d
Sensor width
90 mm
Conventional thermal current
4 A
Working Principle
electromechanical
Switching element
1 NO contact, 1 NC contacts
Switching principle
slow action, positive break NC contact
Mechanical life (min.)
1,000,000
Sensor height
75.5 mm
Magnet switch-on time
100 %
Maks. Sigorta Değeri
4 A gG D-fuse
Positive break travel
11 mm
Rated control voltage
24 VAC/DC
Terminal connection
Connector plug M12, 4-pole, A-codedConnector plug M12, 4-pole, B-coded
Max. actuating speed
2 m/s
Min. Ortam Sıcaklığı
-25 °C
Note (Relative humidity)
non-condensing | non-icing
Note (Switching element)
Change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges
Number of safety contacts
1 | 1 / 2 / 3 / 4
Maks. Ortam Sıcaklığı
+60 °C
Type of the fixing screws
2x M4
Integrated connection, M12
Yes
Utilization Category AC-15
230 VAC / 4 A / Screw terminals | 230_4
Utilization Category DC-13
24 VDC / 4 A / Connector 4-pole | 24_4_FMAW00000002
Number of auxiliary contacts
1 / 2 | 1
Overvoltage category
III
Holding force Fmax, maximum
1,300 N
Max. switching frequency
1,000 /h
Nominal Çalışma Voltajı
24 VDC
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Note (application conditions)
removable guard | hinged safety guard | sliding safety guard
Positive break force, minimum
8.5 N
Number of actuating directions
2
B10D Normally-open contact (NO)
1,000,000
Note, Utilisation category DC-13
Connector 4-pin | Connector 4-pole
B10D Normally-closed contact (NC)
2,000,000
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C | -25 ... +85 °C
Rated insulation voltage (Uᵢ)
250 VAC
Current, Utilisation category AC-15
4 A
Current, Utilisation category DC-13
4 A
Required rated short-circuit current
1,000 A
Voltage, Utilisation category AC-15
230 VAC
Voltage, Utilisation category DC-13
24 VDC
Electrical power consumption, maximum
12 W
Protection class (Operating resource)
2
Coding level according to EN ISO 14119
Low
Note (B10D Normally open contact (NO))
at 10% Ie and ohmic load
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Positive break force per NC contact, minimum
8.5 N
Holding force FZh in accordance with EN ISO 14119
1,000 N
Rated impulse withstand voltage, connector 4-pole
2.5 kV
Permissible installation altitude above sea level, maximum
2,000 m
Tightening torque of the fastening screws for the housing cover, maximum
1 Nm
Tightening torque of the fastening screws for the housing cover, minimum
0.7 Nm