Order No
103006293
Certificates
cULus, CCC cULus
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
AZM190-02/01RKAE0-24VDC-2855
AZM190-02/01RKAE0-24VDC-2855 — Schmersal product. Key specifications: Working Principle: electromechanical; Switching principle: slow action, positive break NC contact; Switching element: Magnet: 2 NC contacts / Actuator: 1 NC contact; Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP67. Article number: 103006293. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 480 g
- • Sertifika: cULus, CCC cULus
Standards
- • BG-GS-ET-19
- • EN ISO 13849-1
- • EN ISO 14119
- • EN IEC 60947-5-1
Product Features
- • connector plug M12, 8-pole
- • Power to lock
- • without Manual release
- • Thermoplastic enclosure
- • Interlock with protection against incorrect locking.
- • Actuating head can be repositioned by 4 x 90°
- • 2 cable entries M 20 x 1.5
- • Slim design, particularly suitable for fitting on hinged doors, aluminium profiles and fencing
- • Sealing mechanism to prevent the ingress of dirt
Technical Specifications
Note
Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit.
PIN 1
11 actuator contact
PIN 2
12 actuator contact
PIN 3
21 1st solenoid contact
PIN 4
22 1st solenoid contact
PIN 5
31 2nd solenoid contact
PIN 6
32 2nd solenoid contact
PIN 7
E1 Ue
PIN 8
E2 GND
Mounting
Screws
Category
3 | 1
General note
Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened
Connection
Connector plug M12, 8-pole, A-coded
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Power to lock
Yes
Mission time
20 Year(s)
Latching force
20 N
Net Ağırlık
480 g
Gross weight
480 g
Housing Material
Glass-fibre, reinforced thermoplastic
Protection class
II
Actuator rotation
0 °
Scope of delivery
Actuator must be ordered separately.
Sensor length
41 mm
Operating current
2,000 mA
IP protection class
IP67
Ambient Temperature
-25 ... +55 °C
Performance level
c | d
Sensor width
52 mm
Conventional thermal current
2 A
Working Principle
electromechanical
Switching element
Magnet: 2 NC contacts / Actuator: 1 NC contact
Switching principle
slow action, positive break NC contact
Mechanical life (min.)
1,000,000
Sensor height
178 mm
Magnet switch-on time
100 %
Maks. Sigorta Değeri
4 A gG D-fuse to DIN EN 60269-1
Positive break travel
3.5 mm
Rated control voltage
24 VAC/DC
Interlocking principle
Power to lock
Number of cable glands
2
Terminal connection
Connector plug M12, 8-pole, A-coded
Max. actuating speed
0.3 m/s
Material of the actuator
Zinc-plated metal
Min. Ortam Sıcaklığı
-25 °C
Note (Delivery capacity)
Not available!
Note (Relative humidity)
non-condensing | non-icing
Note (Switching element)
galvanically separated contact bridges
Number of safety contacts
1 / 2 / 3 / 4 | 3
Maks. Ortam Sıcaklığı
+55 °C
Type of the fixing screws
2x M5
Number of auxiliary contacts
1 / 2
Holding force Fmax, maximum
2,550 N
Max. switching frequency
1,200 /h
Nominal Çalışma Voltajı
24 VDC
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Material of the latching bolt
Die-cast zinc
Note (application conditions)
removable guard | hinged safety guard | sliding safety guard
Positive break force, minimum
20 N
Number of actuating directions
4
B10D Normally-open contact (NO)
1,000,000
B10D Normally-closed contact (NC)
2,000,000
Rated insulation voltage (Uᵢ)
30 V
Current, Utilisation category AC-15
2 A
Current, Utilisation category DC-13
2 A
Required rated short-circuit current
1,000 A
Voltage, Utilisation category AC-15
230 VAC
Voltage, Utilisation category DC-13
24 VDC
Electrical power consumption, maximum
8.5 W
Protection class (Operating resource)
2
Coding level according to EN ISO 14119
Low
Holding force FZh in accordance with EN ISO 14119
1,950 N
Rated impulse withstand voltage, connector 8-pole
0.8 kV