Order No
103042147
Certificates
UKCA cULus TÜV, cULus, FCC, IC, ANATEL, TÜV IC FCC ANATEL
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
AZM201D-I2-ST2-T-1P2P2P-A
AZM201D-I2-ST2-T-1P2P2P-A — Schmersal product. Key specifications: Working Principle: RFID; Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP66 | IP67; Ambient Temperature: -25 ... +60 °C | -30 ... +60 °C; Sensor length: 50 mm. Article number: 103042147. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 495 g
- • Sertifika: UKCA cULus TÜV, cULus, FCC, IC, ANATEL, TÜV IC FCC ANATEL
Standards
- • EN IEC 60947-5-3
- • EN ISO 13849-1
- • EN IEC 62061
- • EN IEC 61508
- • EN ISO 14119
Product Features
- • Thermoplastic enclosure
- • Coding in accordance to ISO 14119 by using RFID-Technology
- • 3 LEDs to show operating conditions
- • Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 1,5 mm horizontally
- • Suitable for hinged and sliding guards
- • Intelligent diagnosis
- • Protection class IP66, IP67
- • High holding force 2000 N
- • 2 OSSD safety outputs for guard door monitoring
- • 2 OSSD safety outputs for guard locking monitoring
- • symmetrical construction form, assembly on 40mm profiles
- • Emergency exit / Emergency release suitable for retrofitting
Technical Specifications
Note
Torx T10
PIN 1
A1 Supply voltage UB
PIN 2
OUT diagnostic output
PIN 3
A2 GND
PIN 4
Y1 Safety output 1
PIN 5
Y3 safety output 3
PIN 6
Y4 safety output Y4
PIN 7
Y2 Safety output 2
PIN 8
IN Solenoid control
Coding
Individual coding, multiple teaching
Category
4 | 3
General note
As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.
PFD value
5.00 x 10⁻⁵
PFH value
5.70 x 10⁻¹⁰ /h
Traceparts
Yes
Voltage type
DC
Shock resistance
30 g / 11 ms
Power to lock
Yes
Mission time
20 Year(s)
Latching force
30 N
Manual release
Yes
Net Ağırlık
495 g
Bağlantı Tipi
Connector M12, 8-pole
Gross weight
495 g
Housing Material
Glass-fibre, reinforced thermoplastic
Protection class
III
Safety functions
Yes
Pollution degree
3
Operating voltage
24 VDC -15 % / +10 % (PELV to EN 60204-1)
Relative humidity
30 ... 95 %
Scope of delivery
Actuator must be ordered separately. | Triangular key for AZM 201
Sensor length
50 mm
Vibration resistance
10 … 150 Hz, amplitude 0.35 mm
Actuator monitored
Yes
Operating current
1,200 mA | 100 mA
Frequency band RFID
125 kHz
IP protection class
IP66 | IP67
Ambient Temperature
-25 ... +60 °C | -30 ... +60 °C
Performance level
d | e
Sensor width
40 mm
Working Principle
RFID
Mechanical life (min.)
1,000,000
Note (series-wiring)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Sensor height
220 mm
Switching thresholds
-3 V … 5 V (Low) | −3 V … 5 V (Low) | 15 V … 30 V (High)
Magnet switch-on time
100 %
Electrical fuse rating
short-circuit proof, p-type
Max. actuating speed
0.2 m/s
Short circuit detection
Yes
Min. Ortam Sıcaklığı
-25 °C
Note (Relative humidity)
non-condensing
Note (holding force FZh)
1,000 N when used with the AZ/AZM201-B30 actuator, for indoor use.
Voltage drop Ud, maximum
4 V
Duration of risk, maximum
200 ms
Maks. Ortam Sıcaklığı
+60 °C
Note (Actuator monitored)
Safety outputs Y1, Y2
Note (holding force Fmax)
1,300 N when used with the AZ/AZM201-B30 actuator, for indoor use.
Recommendation (actuator)
AZ/AZM201-B1 | AZ/AZM201-B30
Type of the fixing screws
2x M6
Utilization Category DC-13
24 VDC / 0.25 A / Gilt für die Ausgänge Y1 und Y2 | 24_0.05
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Relative humidity, maximum
95 %
Relative humidity, minimum
30 %
Time to readiness, maximum
4,000 ms
Overvoltage category
3 | III
Designation, Magnet control
IN
Designation, Safety outputs
Y1 and Y2
Holding force Fmax, maximum
2,600 N
Leakage current Ir, maximum
0.5 mA
Nominal Çalışma Voltajı
24 VDC
Solenoid interlock monitored
Yes
Switching frequency, maximum
1 Hz
Test pulse duration, maximum
5 ms | 1 ms | 0.5 ms
Test pulse interval, minimum
40 ms | 100 ms
Test pulse interval, typical
1,000 ms
Rated impulse withstand voltage (Uimp)
0.8 kV
Classification ZVEI CB24I, Sink
C1 | C0 | C2
Length of sensor chain, maximum
200 m
Note, Utilisation category DC-13
Applies to outputs Y1 and Y2
Transmitter output RFID, maximum
-6 dBm
Absicherung des Diagnoseausganges
short-circuit proof, p-type
Classification ZVEI CB24I, Source
C3 | C1 | C2
Depolama / Taşıma Sıcaklığı
-25 ... +85 °C | -40 ... +85 °C
Rated insulation voltage (Uᵢ)
32 VDC
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
No-load supply current I0, typical
50 mA
Number of digital fail-safe inputs
2
Current, Utilisation category DC-13
0.05 A | 0.25 A
Required rated short-circuit current
100A
Integral system diagnostics, status
Yes
Note (Solenoid interlock monitored)
Safety outputs Y3, Y4
Number of fail-safe digital outputs
2
Voltage, Utilisation category DC-13
24 VDC
Protection class (Operating resource)
3
Coding level according to EN ISO 14119
High
Note (LED switching conditions display)
Error / functional defect: LED red | Operating condition: LED green | Supply voltage UB: LED green
Current consumption with magnet ON, peak
700 mA / 100 ms
Rated operating current (safety outputs)
250 mA
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Holding force FZh in accordance with EN ISO 14119
2,000 N
Safety Integrity Level (SIL), suitable for applications in
3 | 2
Tightening torque of the fastening screws for the housing cover
0.7 ... 1 Nm (Torx T10)
Reaction time, switching off safety outputs via actuator, maximum
100 ms
Reaction time, switching off safety outputs via safety inputs, maximum
0.5 ms
Tightening torque of the fastening screws for the housing cover, maximum
1 Nm
Tightening torque of the fastening screws for the housing cover, minimum
0.7 Nm