Order No
103044782
Certificates
TÜV, cULus, FCC, IC, UKCA, ANATEL cULus IC FCC
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
AZM40Z-I2-ST-1P2P-DU
AZM40Z-I2-ST-1P2P-DU — Schmersal product. Key specifications: Working Principle: RFID; IP protection class: IP66 | IP69 | IP67; Ambient Temperature: -20 ... +55 °C; Terminal connection: Connector plug M12, 8-pole, A-coded; Sensor length: 119.5 mm. Article number: 103044782. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 304 g
- • Sertifika: TÜV, cULus, FCC, IC, UKCA, ANATEL cULus IC FCC
Standards
- • EN IEC 60947-5-3
- • EN IEC 61508
- • EN ISO 13849-1
- • EN ISO 14119
Product Features
- • Compact, flat design
- • High holding force 2000 N
- • Latching force 40 N
- • RFID-technology for needs-based protection against tampering
- • Only one version for hinged and sliding doors
- • Actuator can approach interlock continuously within a 180 degree angle.
- • Symmetrical mounting, can be bolted on either side
- • 119,5 mm x 40 mm x 20 mm
Technical Specifications
Note
Observe the maximum tightening torque of the fixing screws used.
PIN 1
A1 Supply voltage UB
PIN 2
X1 Safety input 1
PIN 3
A2 GND
PIN 4
Y1 Safety output 1
PIN 5
OUT Diagnostic output
PIN 6
X2 Safety input 2
PIN 7
Y2 Safety output 2
PIN 8
IN Solenoid control
Coding
Individual coding, multiple teaching
Mounting
mounting holes countersink
CADENAS
Yes
Category
2 | 4
Latching
Yes
PFD value
8.90 x 10⁻⁵ | 2.40 x 10⁻⁴
PFH value
3.00 x 10⁻⁹ /h | 1.10 x 10⁻⁹ /h
Unlocking
Rotating unlatcher
Voltage type
DC
Shock resistance
30 g / 11 ms
Series-wiring
Yes
Mission time
20 Year(s)
Latching force
40 N (+/- 25%) | 40 N
Manual release
Yes
Net Ağırlık
304 g
Property class
8.8 / 80
Actuating angle
180 °
Gross weight
304 g
Housing Material
Light alloy die cast and plastic (glass-fibre reinforced thermoplastic)
Protection class
III
Safety functions
Yes
Pollution degree
3
Operating voltage
24 VDC -15 % / +10 % (PELV to EN 60204-1)
Sensor length
119.5 mm
Vibration resistance
10 … 55 Hz, amplitude 1 mm
Note (Latch force)
+/- 25%
Operating current
1,200 mA
Frequency band RFID
125 kHz
IP protection class
IP66 | IP69 | IP67
Ambient Temperature
-20 ... +55 °C
Performance level
e | d
Sensor width
40 mm
Working Principle
RFID
Note (series-wiring)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Sensor height
20 mm
Switching thresholds
-3 V … 5 V (Low) | −3 V … 5 V (Low) | 15 V … 30 V (High)
Magnet switch-on time
100 %
Note (Manual release)
Manual release from side
Interlocking principle
bistable
Terminal connection
Connector plug M12, 8-pole, A-coded
Cross-circuit detection
Yes
Max. actuating speed
0.5 m/s
Short circuit detection
Yes
Min. Ortam Sıcaklığı
-20 °C
Note (Delivery capacity)
Not available!
Note (Relative humidity)
non-condensing | non-icing
Voltage drop Ud, maximum
2 V
Duration of risk, maximum
200 ms
Maks. Ortam Sıcaklığı
+55 °C
Note (switching distance)
All switching distances in accordance EN IEC 60947-5-3
Recommendation (actuator)
AZM40-B1
Type of the fixing screws
2x M5
Design of control elements
OSSD, short-circuit proof, p-type | short-circuit proof, p-type
Designation, Safety inputs
X1 and X2
Utilization Category DC-13
24 VDC / 0.25 A | 24_0.05
Mechanical Mounting Conditions
arbitrarily
Note (Mechanical lifetime)
from device version V2 (V1 = 200.000 actuator cycles)
Relative humidity, maximum
93 %
Time to readiness, maximum
4,000 ms
Utilisation category DC-12
24 VDC / 0.25 A | 24_0.05 | 24 VDC / 0.05 A | 24_0.25
Overvoltage category
3 | III
Current consumption at 24 V
10 ... 15 mA | 5 mA
Designation, Magnet control
IN
Designation, Safety outputs
Y1 and Y2
Holding force Fmax, maximum
2,600 N
Leakage current Ir, maximum
0.5 mA
Nominal Çalışma Voltajı
24 VDC - 15 % / + 10 % (stabilised PELV) | 24 VDC
Solenoid interlock monitored
Yes
Switching frequency, maximum
0.25 Hz
Test pulse duration, maximum
5 ms | 1 ms | 0.5 ms
Test pulse interval, minimum
40 ms | 100 ms
Test pulse interval, typical
1,000 ms
Rated impulse withstand voltage (Uimp)
0.8 kV
Classification ZVEI CB24I, Sink
C1 | C0 | C2
Designation, Diagnostic outputs
OUT
Length of sensor chain, maximum
200 m
Transmitter output RFID, maximum
-6 dBm
Classification ZVEI CB24I, Source
C3 | C1 | C2
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C
Rated insulation voltage (Uᵢ)
32 VDC
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
No-load supply current I0, maximum
100 mA
Number of digital fail-safe inputs
2
Assured switching distance "ON" Sao
1 mm
Current consumption at 24V, maximum
15 mA
Current consumption at 24V, minimum
10 mA
Current, Utilisation category DC-12
0.05 A | 0.25 A
Current, Utilisation category DC-13
0.05 A | 0.25 A
Required rated short-circuit current
100A
Integral system diagnostics, status
Yes
Mechanical lifetime, locking cycles
1,000,000
Number of fail-safe digital outputs
2
Voltage, Utilisation category DC-12
24 VDC
Voltage, Utilisation category DC-13
24 VDC
Assured switching distance "OFF" Sar
8 mm
External wire and device fuse rating
2 A gG
Mechanical lifetime, actuator cycles
500,000
Protection class (Operating resource)
3
Coding level according to EN ISO 14119
High
Tightening torque of the fixing screws
4 ... 6 Nm
Note (LED switching conditions display)
Error / functional defect: LED red | Operating condition: LED green | Supply voltage UB: LED green
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Tightening torque of the fixing screws, maximum
6 Nm
Tightening torque of the fixing screws, minimum
4 Nm
Holding force FZh in accordance with EN ISO 14119
2,000 N
Current consumption magnet at switching moment, peak
600 mA / 100 ms
Permissible installation altitude above sea level, maximum
2,000 m
Safety Integrity Level (SIL), suitable for applications in
2 | 3
Reaction time, switching off safety outputs via actuator, maximum
100 ms
Angular misalignment between solenoid interlock and actuator, maximum
2 °
Reaction time, switching off safety outputs via safety inputs, maximum
1.5 ms