Order No
101138759
Certificates
cULus
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
BN 65-RZ/V 4,0M
BN 65-RZ/V 4,0M — Schmersal product. Key specifications: Working Principle: Magnetic drive; Switching principle: Latching; Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP67; Ambient Temperature: -28 ... +75 °C | -25 ... +75 °C. Article number: 101138759. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 205 g
- • Sertifika: cULus
Product Features
- • With pre-wired cable
- • Actuation from front
- • with bias magnet
- • Non-contact principle
- • Long life
- • Actuating surface and direction of actuation marked by switch symbol
- • Construction form Ø 13 mm
- • Thermoplastic enclosure
- • Actuating distance up to 60 mm depending on actuating magnet and version
- • with central mounting
- • Available for actuation from front or side
Technical Specifications
Mounting
central with threated flange
Latching
Yes
General note
The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.
Cable type
H03VV-F
Active area
front side
bias magnet
Yes
Cable sleeve
Yes
Shock resistance
15 g, on sine wave oscillation
Cable entry
PG9
Net Ağırlık
205 g
Bağlantı Tipi
Pre-wired cable
Length of cable
4 m
Gross weight
205 g
Housing Material
Glass-fibre, reinforced thermoplastic
Repeat accuracy R
0.3 mm
Scope of delivery
Actuator must be ordered separately.
Sensor length
103 mm
Vibration resistance
10 … 55 Hz, amplitude 1 mm
Diameter of sensor
13 mm
Wire cross-section
18 AWG | 0.75 mm²
width across flats
22 BK
Actuation Element
Magnet
IP protection class
IP67
Ambient Temperature
-28 ... +75 °C | -25 ... +75 °C
Working Principle
Magnetic drive
Switching principle
Latching
Mechanical life (min.)
1,000,000,000
Number of cable wires
2
Switching distance Sn
3 mm … 45 mm | BP 12 = 20 mm | BP 34 = 15 mm | 2 x BP 10 = 3 mm | BP 11 = 15 mm | BP 22 N + BP 22 S = 35 mm | BP 31 = 10 mm | BP 20 = 10 mm | BP 21 = 45 mm
Resistant to vibration
15 g, on sine wave oscillation
Suitable for elevators
Yes
Max. actuating speed
18 m/s
Bounce duration, maximum
3 ms
Bounce duration, minimum
0.3 ms
Min. Ortam Sıcaklığı
-25 °C
Housing construction form
Cylinder smooth
Maks. Ortam Sıcaklığı
+75 °C
Note (switching distance)
All switching distances in accordance EN IEC 60947-5-2
Recommendation (actuator)
BP 12 | BP 31 | BP 22 N | BP 21 | BP 22 S | BE 20 | BP 11 | 2x BP 10 | BP 20 | BP 34
Bounce duration, typically
0.6 ms
Number of snap-in contacts
1
Switching current, maximum
1 A
Switching voltage, maximum
230 VAC | 230 VDC
Max. switching frequency
720,000 /h
Switching capacity, maximum
60 W
Material of the Cable mantle
PVC
Note (Switching distance Sn)
Actuating distance up to 45 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or n
Switching frequency, maximum
300 Hz
Maximum switching time open (NC)
0.5 ms
Maximum switching time close (NO)
1.5 ms
Minimum switching time close (NO)
0.3 ms
Tightening torque of nuts, maximum
3 Nm
Recommendation (actuator, lift switchgear)
BP 10 | 2 x BP 10 | BP 15 | BP 34