Order No
101187273
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
BN 650-10Z
BN 650-10Z — Schmersal product. Key specifications: Working Principle: Magnetic drive; Switching principle: Reed contacts, Non-contact principle; Switching element: Normally open contact (NO); Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP67. Article number: 101187273. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 65 g
Product Features
- • With pre-wired cable
- • Actuation from side
- • with bias magnet
- • Non-contact principle
- • Long life
- • Construction form Ø 13 mm
- • Thermoplastic enclosure
- • Actuating distance up to 60 mm depending on actuating magnet and version
- • with central mounting
Technical Specifications
Mounting
central with threated flange
General note
This does not apply to the bistable contact. | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. | When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N).
Cable type
LiYY
Active area
lateral
bias magnet
Yes
Cable sleeve
Yes
Shock resistance
30 g / 11 ms
Cable entry
PG9
Net Ağırlık
65 g
Bağlantı Tipi
Pre-wired cable
Length of cable
1 m
Gross weight
65 g
Housing Material
Glass-fibre, reinforced thermoplastic
Repeat accuracy R
0.3 mm
Scope of delivery
Actuator must be ordered separately.
Sensor length
103 mm
Vibration resistance
10 … 55 Hz, amplitude 1 mm
Diameter of sensor
13 mm
Wire cross-section
0.25 mm² | 23 AWG
width across flats
22 BK
Actuation Element
Magnet
IP protection class
IP67
Ambient Temperature
-25 ... +70 °C
Working Principle
Magnetic drive
Switching element
Normally open contact (NO)
Switching principle
Reed contacts, Non-contact principle
Mechanical life (min.)
100,000,000
Number of cable wires
2
Switching distance Sn
2 x BP 15/2 = 17 mm | BP 15 = 6 mm | BP 21 = 25 ... 50 mm | 5 mm … 50 mm | 2 x BP 10 = 17 mm | BP 11 = 20 mm | BP 10 = 5 mm | BP 20 = 20 mm | 2 x BP 15 = 17 mm | BP 12 = 10 ... 30 mm | BP 34 = 15 ... 20 mm | BP 31 = 20 mm
Suitable for elevators
Yes
Max. actuating speed
18 m/s
Bounce duration, maximum
0.2 ms
Min. Ortam Sıcaklığı
-25 °C
Note (Delivery capacity)
Not available!
Housing construction form
Cylinder smooth
Maks. Ortam Sıcaklığı
+70 °C
Note (switching distance)
All switching distances in accordance EN IEC 60947-5-2
Recommendation (actuator)
BP 10 | BP 15 | BP 12 | BP 31 | BP 21 | 2x BP 15/2 | BP 11 | 2x BP 15 | 2x BP 10 | BP 20 | BP 34
Switching current, maximum
1 A
Switching voltage, maximum
200 VDC | 200 VAC
Max. switching frequency
1,080,000 /h
Switching capacity, maximum
30 VA | 30 W
Material of the Cable mantle
PVC
Note (Switching distance Sn)
Actuating distance up to 50 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or n
Switching frequency, maximum
300 Hz
Tightening torque of nuts, maximum
3 Nm
Number of NO (Normally Open) Contacts
1
Recommendation (actuator, lift switchgear)
2 x BP 15 | BP 10 | 2 x BP 15/2 | 2 x BP 10 | BP 15 | BP 34