Order No
101208004
Certificates
cULus
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
CSP 11-34-D-M-ST
CSP 11-34-D-M-ST — Schmersal product. Key specifications: Working Principle: inductive; Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP67 | IP65; Ambient Temperature: -25 ... +70 °C; Sensor length: 27 mm. Article number: 101208004. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP65
- • Ağırlık: 111 g
- • Sertifika: cULus
Standards
- • EN IEC 60947-5-3
- • EN IEC 61508
- • EN ISO 13849-1
Product Features
- • 1 x connector plug M12, 8-pole
- • Actuation from side
- • without On-site acknowledgment
- • NOTICE: Not available! (Replacement: RSS 36 I)
- • Thermoplastic enclosure
- • Electronic contact-free, coded system
- • Tampering protection by paired coding of sensor and actuator
- • Misaligned actuation possible
- • High repeat accuracy of the switching points
- • Max. length of the sensor chain 200 m
- • 2 short-circuit proof PNP safety outputs
- • Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Technical Specifications
PIN 1
1A1 Ue: (1)
PIN 2
X1 Safety input 1
PIN 3
A2 GND
PIN 4
Y1 Safety output 1
PIN 5
OUT Diagnostic output OUT
PIN 6
X2 Safety input 2
PIN 7
Y2 Safety output 2
PIN 8
IN without function
Category
4
General note
Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.5 ms. Short-circu | Coding of safety sensor and actuator: To activate the safety function (coding) of the CSP 34 for the first time, the associated actuator must be brought into the detection area of the switched on safety sensor. The automatic learn process of the actuator
PFH value
3.60 x 10⁻⁹ /h
Cascadable
Yes
EMC rating
IEC 61000-6-2
Active area
Glass-fibre, reinforced thermoplastic | lateral
Voltage type
DC
Shock resistance
30 g / 11 ms
Mission time
20 Year(s)
Net Ağırlık
111 g
Number of LEDs
3
Bağlantı Tipi
Connector plug M12, 8-pole
Sensor topology
Sensor for series wiring
Actuating panels
lateral
Gross weight
111 g
Current derating
Ambient temperature -25°C … +65°C: ≤ 0.25 A | Ambient temperature -25°C … +70°C: ≤ 0.1 A
Housing Material
Glass-fibre, reinforced thermoplastic
Protection class
II
Safety functions
Yes
Diagnostic output
Yes
Pollution degree
3
Operating voltage
24 VDC -15 % / +10 %
Repeat accuracy R
0.5 mm
Scope of delivery
Actuator must be ordered separately.
Sensor length
27 mm
Vibration resistance
10 … 55 Hz, amplitude 1 mm
Operating current
600 mA | 50 mA
IP protection class
IP67 | IP65
Ambient Temperature
-25 ... +70 °C
Performance level
e
Sensor width
35 mm
Working Principle
inductive
Sensor height
108.2 mm
Utilisation category
DC-12
Interfering radiation
IEC 61000-6-4
Reaction time, maximum
30 ms
Cross-circuit detection
Yes
Short circuit detection
Yes
Min. Ortam Sıcaklığı
-25 °C
Note (Delivery capacity)
Not available!
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 30 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 8 mm.
Switch distance, typical
11 mm
Voltage drop Ud, maximum
0.5 V | 5 V
Duration of risk, maximum
60 ms
Housing construction form
Block
Maks. Ortam Sıcaklığı
+70 °C
Note (switching distance)
All switching distances in accordance EN IEC 60947-5-3
Recommendation (actuator)
CSP 34-S-1
Design of control elements
p-type
Utilization Category DC-13
24 VDC / 0.25 A | 0.05 A | 24 VDC | 24 VDC / 0.05 A
Mechanical Mounting Conditions
not flush
Utilisation category DC-12
24 VDC | 0.05 A | 24 VDC / 0.05 A | 24 VDC / 0.25 A | 24_0.05 | 24_0.25
Overvoltage category
3 | III
Leakage current Ir, maximum
0.5 mA
Nominal Çalışma Voltajı
24 VDC
Switching frequency, approx.
3 Hz
Recommended safety switchgear
SRB-E-301ST | SRB-E-201LC | PROTECT PSC1
Rated impulse withstand voltage (Uimp)
0.8 kV
Electrical fuse rating, maximum
2 A
Rated operating voltage, maximum
26.4 VDC
Rated operating voltage, minimum
20.4 VDC
Depolama / Taşıma Sıcaklığı
-25 ... +85 °C | -40 ... +85 °C
Rated insulation voltage (Uᵢ)
32 VAC/DC
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
No-load supply current I0, typical
100 mA
Number of series-wiring of sensors
31
Assured switching distance "ON" Sao
8 mm
Current, Utilisation category DC-12
0.05 A | 0.25 A
Current, Utilisation category DC-13
0.25 A
Required rated short-circuit current
100A
Integral system diagnostics, status
Yes
Note (Electrical data, Fuse rating)
(Circuit breaker)
Number of fail-safe digital outputs
2
Voltage, Utilisation category DC-12
24 VDC
Voltage, Utilisation category DC-13
24 VDC
Absicherung des Sicherheitsausganges
short-circuit proof
Assured switching distance "OFF" Sar
15 mm
Protection class (Operating resource)
2
Hysteresis (Switching distance), maximum
1.5 mm
Rated operating current (safety outputs)
250 mA
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Output current, (fail-safe output), maximum
0.25 A
Number of semi-conductor outputs with signaling function
1
Safety Integrity Level (SIL), suitable for applications in
3