Order No
103053688
Certificates
cULus
Schmersal
Automation Technology
Command and Signaling Devices
DHS-U1-BKWH-L5-5.00-LT Command and Signaling Devices
DHS-U1-BKWH-L5-5.00-LT — Schmersal Command and Signaling Devices. Key specifications: Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP66 | IP67; Ambient Temperature: -40 ... +75 °C | -40 ... +100 °C; EPLAN: Yes; PIN 1: 24 VDC: brown. Article number: 103053688. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 575 g
- • Sertifika: cULus
Standards
- • EN IEC 60947-5-1
Product Features
- • With illuminated pushbutton
- • Connecting cable, 5-core, 5 m
- • Protection class IP65 / IP67
- • Machine status directly recognisable on the door handle
- • Door handle in an ergonomical design
- • Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- • Can also be used without safety switchgear device
- • For left or right hinged safety guards
Technical Specifications
EPLAN
Yes
PIN 1
24 VDC: brown
PIN 2
Normally open contact (illuminated button): white (WH)
PIN 3
GND: Blue
PIN 4
Input LED (in illuminated button): black (BK)
PIN 5
n.c.: red (RD) or grey (GY)
CADENAS
Yes
Length
202 mm
Width
40 mm
Traceparts
Yes
Height
84 mm
Shock resistance
30 g / 11 ms (EN 60947-5-2)
Cable diameter
5.5 mm
Net Ağırlık
575 g
Bağlantı Tipi
Connecting cable, 5 pole
Length of cable
5 m
Actuating stroke
1 mm
Gross weight
575 g
Housing Material
Glass-fibre, reinforced thermoplastic
Protection class
III
Pollution degree
3
Operating voltage
24 VDC -15 % / +10 %
Scope of delivery
The push button caps (blue, green, red, white, yellow) are included in the scope of delivery.
Vibration resistance
10 … 150 Hz, amplitude 0.35 mm (EN 60947-5-2)
Wire cross-section
0.2 mm² | 24 AWG
Operating current
150 mA
IP protection class
IP66 | IP67
Ambient Temperature
-40 ... +75 °C | -40 ... +100 °C
Note Bounce duration
Bounce duration at an Actuating speed of 100mm/s
Bending radius (fixed)
5 x Ø-cable
Material of the handle
translucent PMMA
Material of the holder
Glass-fibre, reinforced thermoplastic
Actuating force, maximum
10 N
Bounce duration, maximum
2 ms
Min. Ortam Sıcaklığı
-25 °C
Note (Relative humidity)
non-condensing | non-icing
Bending radius (repeated)
10 x Ø-cable
Maks. Ortam Sıcaklığı
+65 °C
Type of the fixing screws
2x M6
Idle assignable pushbutton
Yes
Utilization Category DC-13
0.03 A | 24 VDC
Relative humidity, maximum
93 %
Utilisation category DC-12
24 VDC | 0.03 A
Overvoltage category
III
Max. switching frequency
1,000 /h
Nominal Çalışma Voltajı
24 VDC
Material of the Cable mantle
PUR
Rated impulse withstand voltage (Uimp)
0.8 kV
Tightening torque of the screw
3.5 Nm
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C
Rated insulation voltage (Uᵢ)
32 VDC
Current consumption inidcator lamp
30 mA
Required rated short-circuit current
100A
External wire and device fuse rating
2 A gG (Connecting cable, 5 pole) | 2 A gG
Mechanical lifetime, Command devices
1,000,000
Note (scope of delivery, number and type)
The insert for use with the safety sensor RSS260 or without integrated actuator must be ordered separately.
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Typical actuating force of the push button
10 N
Type of mounting screws for the handle body
2x Torx Plus T20x25
Colour of the illuminated push button calotte
Blue | Yellow | Red | White | Green
Tightening torque of mounting screws for the handle body
2.5 Nm
Permissible installation altitude above sea level, maximum
3,000 m