Order No
103064554
Certificates
cULus
Schmersal
Automation Technology
Command and Signaling Devices
DHS-U1-BKWH-LST5-0.25-LT-3247 Command and Signaling Devices
DHS-U1-BKWH-LST5-0.25-LT-3247 — Schmersal Command and Signaling Devices. Key specifications: Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP66 | IP67; Ambient Temperature: -40 ... +75 °C | -40 ... +100 °C; PIN 1: 24 VDC; PIN 2: Normally open contact (illuminated button). Article number: 103064554. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Sertifika: cULus
Standards
- • EN IEC 60947-5-1
Product Features
- • Actuator insert
- • With illuminated pushbutton
- • Connecting cable with connector M12, 5-pole, 0.25 m
- • Protection class IP65 / IP67
- • Machine status directly recognisable on the door handle
- • Door handle in an ergonomical design
- • Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- • Can also be used without safety switchgear device
- • For left or right hinged safety guards
Technical Specifications
PIN 1
24 VDC
PIN 2
Normally open contact (illuminated button)
PIN 3
GND
PIN 4
Input LED (in illuminated button)
PIN 5
n.c.
Notice
Coming soon.
CADENAS
Yes
Length
202 mm
Width
40 mm
Traceparts
Yes
Height
84 mm
Shock resistance
30 g / 11 ms (EN 60947-5-2)
Cable diameter
5.5 mm
Bağlantı Tipi
Connecting cable with M12 connector, straight, 5-pole
Length of cable
0.25 m
Actuating stroke
1 mm
Housing Material
Glass-fibre, reinforced thermoplastic
Protection class
III
Pollution degree
3
Operating voltage
24 VDC -15 % / +10 %
Scope of delivery
Actuator insert ACC-DHS-U1-INS included | The push button caps (blue, green, red, white, yellow) are included in the scope of delivery.
Vibration resistance
10 … 150 Hz, amplitude 0.35 mm (EN 60947-5-2)
Operating current
150 mA
IP protection class
IP66 | IP67
Ambient Temperature
-40 ... +75 °C | -40 ... +100 °C
Note Bounce duration
Bounce duration at an Actuating speed of 100mm/s
Bending radius (fixed)
5 x Ø-cable
Material of the handle
translucent PMMA
Material of the holder
Glass-fibre, reinforced thermoplastic
Actuating force, maximum
10 N
Bounce duration, maximum
2 ms
Min. Ortam Sıcaklığı
-25 °C
Note (Relative humidity)
non-condensing | non-icing
Bending radius (repeated)
10 x Ø-cable
Maks. Ortam Sıcaklığı
+65 °C
Type of the fixing screws
2x M6
Idle assignable pushbutton
Yes
Utilization Category DC-13
0.03 A | 24 VDC
Relative humidity, maximum
93 %
Utilisation category DC-12
24 VDC | 0.03 A
Overvoltage category
III
Max. switching frequency
1,000 /h
Nominal Çalışma Voltajı
24 VDC
Material of the Cable mantle
PUR
Rated impulse withstand voltage (Uimp)
0.8 kV
Tightening torque of the screw
3.5 Nm
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C
Rated insulation voltage (Uᵢ)
32 VDC
Current consumption inidcator lamp
30 mA
Required rated short-circuit current
100A
External wire and device fuse rating
2 A gG (Connecting cable with M12 connector, straight, 5-pole) | 2 A gG
Mechanical lifetime, Command devices
1,000,000
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-40 °C
Typical actuating force of the push button
10 N
Type of mounting screws for the handle body
2x Torx Plus T20x25
Colour of the illuminated push button calotte
Blue | Yellow | Red | White | Green
Tightening torque of mounting screws for the handle body
2.5 Nm
Permissible installation altitude above sea level, maximum
3,000 m