Order No
103050098
Certificates
ATEX (Declaration of Conformity)
Schmersal
Ex / ATEX Anahtarlama Cihazları
Safety Sensors
EX-BNS 33-11Z-3GD 10M Safety Sensors
EX-BNS 33-11Z-3GD 10M — Schmersal Safety Sensors. Key specifications: Switching principle: Reed contacts, Non-contact principle; Switching element: 1 NO contact, 1 NC contacts; Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP67; Sensor length: 13 mm. Article number: 103050098. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 452 g
- • Sertifika: ATEX (Konformitätserklärung)
Standards
- • EN IEC 60947-5-3
- • EN ISO 13849-1
Product Features
- • Explosion protection for ATEX Zones 2 and 22
- • Thermoplastic enclosure
- • 88 mm x 25 mm x 13 mm
- • Concealed mounting possible
- • Insensitive to transverse misalignment
- • no mechanical wear
Technical Specifications
Coding
Yes
CADENAS
Yes
General note
The contact configuration for versions with or without LED is identical. | Contact symbols shown for the closed condition of the guard device.
Traceparts
Yes
Active area
lateral
Shock resistance
30 g / 11 ms
Mission time
20 Year(s)
Net Ağırlık
452 g
Bağlantı Tipi
cable
Length of cable
10 m
Gross weight
452 g
Housing Material
Glass-fibre, reinforced thermoplastic
Scope of delivery
Actuator must be ordered separately.
Sensor length
13 mm
Vibration resistance
10 … 55 Hz, amplitude 1 mm
Wire cross-section
0.25 mm² | 23 AWG
Actuation Element
Magnet
Direction of motion
Head-on to the active surface
IP protection class
IP67
Sensor width
88 mm
Switching element
1 NO contact, 1 NC contacts
Switching principle
Reed contacts, Non-contact principle
Sensor height
25 mm
Number of cable wires
4
Impact energy, maximum
7 J
Traceparts, product ID
33-22052019-077517
Cross-circuit detection
Yes
Short circuit detection
Yes
Manufacturer declaration
ATEX Zone 2 and 22
Note (Repeat accuracy R)
Repeat accuracy R ≤ 0,1 x Sao
Housing construction form
Block
Note (switching distance)
All switching distances in accordance EN IEC 60947-5-3
Recommendation (actuator)
EX-BPS 33-3G/D
Explosion protection zones
22 | 2
Mechanical Mounting Conditions
not flush
Switching current, maximum
0.4 A
Switching voltage, maximum
100 VAC | 100 VDC
Switching capacity, maximum
10 W
Material of the Cable mantle
PVC
Prerequisite evaluation unit
Yes
Switching frequency, maximum
5 Hz
Explosion protection category
3G | 3D
Explosion protection designation
D II 3G Ex nC IIC T6 Gc X | D II 3D Ex tc IIIC T80°C Dc X
B10D Normally-closed contact (NC)
25,000,000
Explosion protection: regulations
EN ISO 80079-37 | EN IEC 60079-0 | EN IEC 60079-15 | EN ISO 80079-36 | EN 60079-31
Assured switching distance "ON" Sao
5 mm
Assured switching distance "OFF" Sar
15 mm
Number of NO (Normally Open) Contacts
1
Number of NC (Normally Closed) Contacts
1
B10D- Value Normally-closed contact/Normally open contact (NC/NO)
25,000,000