Note
Diameter backing plate 100 mm | All indications including the conductor ferrules.
EPLAN
Yes
Mounting
central nut
Toggle
long
CADENAS
Yes
Length
72 mm
Diameter
100 mm
Latching
Yes
Design
Large marking plate
Unlocking
Rotating unlatcher
Traceparts
Yes
Height
115 mm
Versions
Main switch 63 A | Front plate mounting
Cable Cross-Section
4 mm² ... 25 mm²(All indications including the conductor ferrules.)
Voltage type
AC
Shock resistance
<50 g (EN 60068-2-27)
Mission time
20 Year(s)
Mounting depth
78 mm
Net Ağırlık
220 g
Climatic stress
DIN IEC 60068-2-78 | DIN IEC 60068-2-30
Mounting height
32 mm
Gross weight
220 g
Latching position
right
Min. cable cross-section
4 mm², flexible | 6 mm², starr
Mounting diameter
22.3 mm
Vibration resistance
5 g
Max. cable cross-section
25 mm², rigid | 16 mm², flexible
Wire cross-section
4 AWG
IP protection class
IP69K | IP67
Notes (front plate)
Including identification plate
Ambient Temperature
+0 ... +75 °C | +0 ... +80 °C
Conventional thermal current
63 A
Switching principle
Slow action
Colour of the handle
Red
Length of the handle
52.5 mm
Mechanical life (min.)
100,000
Sealing Type
Membrane | Lip gaskets
Colour of the bellows
Blue
Colour of the bracket
Silver
Colour of the sealing
Blue
Maks. Sigorta Değeri
63 A gL Sicherung
Note (Mounting depth)
Depth behind front panel including switch block
Material of the toggle
ABS
Note (Mounting height)
Height in front of the front panel.
Switching angle, right
90 °
Terminal connection
Screw terminals
Anti-torsion protection
Yes
Material of the bracket
Stainless steel (V4A)
Number of main contacts
3
Colour of the front ring
Silver
Min. Ortam Sıcaklığı
+0 °C
Note (Relative humidity)
non-condensing | non-icing
Switching capacity, AC-3
18,500 W
Lockable neutral position
Yes
Maks. Ortam Sıcaklığı
+80 °C
Switching capacity, AC-23
22,000 W
Diameter of the front ring
45 mm
Material of the front ring
Stainless steel (V4A)
Mechanical Mounting Conditions
all surfaces min 3° to the horizontal
Number of switch positions
1
Relative humidity, maximum
93 %
Tightening torque of Clips
2.5 Nm
Colour of the marking plate
Yellow
Nominal Çalışma Voltajı
690 VAC
Colour of the Contact element
Black
Material of the marking plate
Stainless steel (V4A)
Note (application conditions)
Main switch as emergency stop version with red toggle and yellow plate | Disconnect Switch, Product line B200, Type series B263, 3 pole ON-OFF switch, Front mounting switch
Thickness, of the front panel
1.5 ... 6 mm
Rated impulse withstand voltage (Uimp)
6 kV
Mounting position main contacts
0°
Depolama / Taşıma Sıcaklığı
+0 ... +80 °C
Tightening torque of nuts, maximum
4 Nm
Thickness of the front panel, maximum
6 mm
Thickness, of the front panel, minimum
1.5 mm
Note (scope of delivery, number and type)
Scope of delivery with contact carrier SMF-SG | without strengthening plate, with marking plate
Storage and transport temperature, maximum
+80 °C
Storage and transport temperature, minimum
+0 °C
Ambient temperature, switch element, maximum
open +50 °C | encapsulated +40 °C
Ambient temperature, switch element, minimum
encapsulated -25 °C | open -25 °C
Permissible installation altitude above sea level, maximum
2,000 m