Order No
103053910
Certificates
cULus cULus, CCC
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
PS215-Z12-G-ST-J200
PS215-Z12-G-ST-J200 — Schmersal product. Key specifications: Switching principle: Snap action; Switching element: 1 NO contact, 2 NC contacts; Housing Material: Metal, zinc die-cast; IP protection class: IP66 | IP67; Ambient Temperature: -30 ... +80 °C. Article number: 103053910. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Sertifika: cULus cULus, CCC
Standards
- • EN IEC 60947-5-1
Product Features
- • connector plug M12, 8-pole
- • only for positioning tasks
- • Lever angle adjustable in 15° steps
- • Metal enclosure
- • Design to EN 50047
- • Simple and quick to adjust the control elements by 45°.
- • Plastic actuating element
- • Diameter actuating element 6 mm
- • LED version available
Technical Specifications
Cable Cross-Section
0.34 mm² ... 1.5 mm²
Bağlantı Tipi
Connector plug M12, 8-pole
Housing Material
Metal, zinc die-cast
Contact material
Silver
Protection class
I
Pollution degree
3
Min. cable cross-section
0.34 mm²
Sensor length
32.5 mm
Connector position
Bottom
Max. cable cross-section
1.5 mm²
Actuation Element
Rod lever J200
IP protection class
IP66 | IP67
Ambient Temperature
-30 ... +80 °C
Sensor width
31 mm
Conventional thermal current
2 A
Switching element
1 NO contact, 2 NC contacts
Switching principle
Snap action
Mechanical life (min.)
10,000,000
Sensor height
180.5 mm
Maks. Sigorta Değeri
6 A gG D-fuse
Min. Actuation Speed
10 mm/min
Max. actuating speed
1 m/s
Housing Coating Material
painted
Min. Ortam Sıcaklığı
-30 °C
Number of safety contacts
2
Housing construction form
Norm construction design
Maks. Ortam Sıcaklığı
+80 °C
Utilization Category AC-15
30 VAC | 2 A
Utilization Category DC-13
24 VDC | 2 A
Number of auxiliary contacts
1
Max. switching frequency
5,000 /h
Positive break force, minimum
40 N
Rated impulse withstand voltage (Uimp)
0.8 kV
Rated insulation voltage (Uᵢ)
250 VAC
Required rated short-circuit current
400A
Integral system diagnostics, general
Yes
Number of NO (Normally Open) Contacts
1
Number of NC (Normally Closed) Contacts
2
Tightening torque of the fixing screws
2 Nm
Tightening torque of electrical connection, maximum
0.8 Nm
Tightening torque of electrical connection, minimum
0.6 Nm
Tightening torque of the fastening screws for the housing cover
2.6 Nm