Order No
103003605
Article Code
103003605
Certificates
TÜV cULus FCC IC ANATEL
Schmersal
Emniyetli Anahtarlama ve Denetleme
Emniyet Sensörleri
RSS260-SD-ST
Product Description
- • IP Rating: IP65/IP67 | Voltage: 24 VDC | Weight: 61 g | PL e
Standards
- • EN ISO 13849-1 EN IEC 61508
Product Features
- • Universal coding with RFID technology_x000D_
- • 1 x connector plug M8_x000D_
- • Frontal and lateral actuation enabled_x000D_
- • Max. 31 sensors can be wired in series._x000D_
- • Termoplastik gövde_x000D_
- • Simple mounting without additional angle_x000D_
- • İhtiyaca dayalı müdahale koruması için RFID teknolojisi
Technical Specifications
PIN 1
A1 U e : White
PIN 2
X1 safety input 1: Kahverengi
PIN 3
A2 GND: Green
PIN 4
Y1 safety output 1: Yellow
PIN 5
OUT serieller Diagnoseausgang: grau
PIN 6
X2 safety input 2: Pembe
PIN 7
Y2 safety output 2: Mavi
PIN 8
INPUT series diagnostics input Pembe
Mounting
20 mm screw length genellikle sensor mounted etmek for is sufficient. Mounting plates when used 25 mm in length screws we recommend.
Coding
Universal coding
Category
4
General Note
Evaluation requirements: two-channel safety input, suitable for p-switching sensors with NO function.
Note (Sao)
The safety switching distance Sao specifications refer to a temperature range of -10 °C ... +60 °C. For a temperature range of -28 °C ... +65 °C, Sao is reduced by 2 mm.
Active Area
lateral front
PFD Value
1.20 x 10⁻⁴
PFH Value
6.80 x 10⁻¹⁰ /h
Number of LEDs
3
Number of Poles
8
Impact Resistance
30 g / 11 ms
Mission Time
20 Year(s)
Max. Hysteresis
2 mm
Serial Diagnostics
Yes
Series Connection
Yes
Gross Weight
61 g
Housing Material
Plastik, termoplastik, automatically fading
Pollution Degree
3
Max. Relative Humidity
0.93
Note (Relative Humidity)
Non-condensing, non-icing
Radiated Interference
IEC 61000-6-4
Sensor Length
29.5 mm
Scope of Delivery
Actuator additionally order must be.
Vibration Resistance
10 … 55 Hz, amplitude 1 mm
Cable Capacitance
50 nF
Max. Risk Time
200 ms
Sensor Topology
Series connection for sensor
Operating Current
150 mA
IP Protection Class
IP65 IP67
Short-Circuit Detection
Yes
Max. Response Time
100 ms
Ambient Temperature
-28 ... +65 °C
Performance Level
e
RFID Frequency Band
125 kHz
Sensor Width
39.2 mm
Operating Voltage
24 VDC -15% / +10% (stabilized PELV power source)
Operating Principle
RFID
Actuation Panels
lateral front taraf
Cascadable
Yes
Housing Design Form
Blok
Sensor Height
18 mm
Recommendation (Actuator)
RST16-1 RST-U-2 RST260-1
Repeat Accuracy R
0.5 mm
Note (Series Connection)
Unlimited number of devices; observe the external line fuse; max. 31 devices when using serial diagnostics (SD)
Cross-Circuit Detection
Yes
Fixing Screw Type
2x M4
Terminal Connection
Connector M8, 8-pole
Max. Leakage Current (Ir)
0.5 mA
Min. Operating Current
0.5 mA
Suitable SIL Applications
3
Safety Functions
Yes
Max. Installation Altitude
2,000 m
Max. Test Pulse Duration
1 ms
Max. Ready Time
2,000 ms
Current Utilization Cat. DC-12
0.25 A
Current Utilization Cat. DC-13
0.25 A
Mechanical Mounting Conditions
Embedded not
Min. Test Pulse Interval
100 ms
Note (Switching Distance)
All switching distances are per the EN IEC 60947-5-3 standard. Axial misalignment is tolerated. The possible misalignment depends on the distance between the active surfaces. The sensor remains active within the tolerance range.
Note (Repeat Accuracy R)
Axial offset: the long edge allows a maximum height misalignment of 8 mm between the sensor and the actuator. Axial misalignment (y) max. ±18 mm. Minimum distance of 100 mm between two sensor systems
Overvoltage Category
III
Rated Operating Voltage
24 VDC
Typical Test Pulse Interval
1000 ms
Voltage Utilization Cat. DC-12
24 VDC
Voltage Utilization Cat. DC-13
24 VDC
Serial Diagnostics (SD) Definition
OUT
Safety Inputs Definition
X1 and X2
Max. Voltage Drop (Ud)
1 V
Max. Fixing Screw Torque
0.8 Nm
Max. Transmitter RFID Output
-6 dBm
Number of Sensors Connected in Series
31
Impulse Withstand Voltage (Uimp)
0.8 kV
Control Elements Design
short devre resistant
Storage/Transport Temperature
-28 ... +85 °C
Integrated System Diagnostics Status
Yes
Coding Level (EN ISO 14119)
Low
Note (Sensor Chain Length)
Cable length and cross-section change the voltage drop depending on the output current
Recommended Safety Switch
PROTECT PSC1 SRB-E-301ST SRB-E-201LC
Safety Outputs Definition
Y1 and Y2
Max. Electrical Fuse Rating
0.08333333333212067
Rated Insulation Voltage (Uᵢ)
32 VDC
Max. Switching Frequency (Approx.)
1 Hz
Typical Lateral Switching Distance
9 mm
Typical Frontal Switching Distance
12 mm
Required Rated Short-Circuit Current
100 A
Number of Safe Digital Outputs
2
ZVEI CB24I Sink Classification
C1 C2
Safety Inputs Current Consumption
5 mA
ZVEI CB24I Source Classification
C2
Typical Idle Operating Current (I₀)
35 mA
Max. Output Current (Safe Output)
0.25 A
Note (LED Switching Condition Indication)
Yellow LED: Operation status Green LED: Supply voltage Red LED: Fault
Guaranteed Open Lateral Switching Distance
6 mm
Guaranteed Open Frontal Switching Distance
10 mm
Guaranteed Closed Lateral Switching Distance
15 mm
Guaranteed Closed Frontal Switching Distance
18 mm
Rated Operating Current (Safety Outputs)
250 mA
Max. Response Time (Actuator to Safety Output Off)
100 ms