Order No
101029323
Certificates
CCC, cULus
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
TZMW-SNA
TZMW-SNA — Schmersal product. Key specifications: Working Principle: electromechanical; Switching principle: Slow action; Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP67 | IP65; Ambient Temperature: +0 ... +50 °C | -25 ... +55 °C. Article number: 101029323. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP65
- • Ağırlık: 480 g
- • Sertifika: CCC, cULus
Standards
- • BG-GS-ET-19
- • EN IEC 60947-5-1
- • EN ISO 13849-1
- • EN ISO 14119
Product Features
- • Thermoplastic enclosure
- • Holding force 1500 N
Technical Specifications
Note
All indications including the conductor ferrules. | Electrical life on request. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit.
Mounting
Screws
Category
3 | 1
Cable Cross-Section
1 mm² ... 1 mm²(All indications including the conductor ferrules.) | 1 x 0.5 mm² ... 1 x 1.5 mm² (All indications including the conductor ferrules.)
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Strip length
8 mm
Power to lock
Yes
Mission time
20 Year(s)
Latching force
20 N
Manual release
Yes
Net Ağırlık
480 g
Bağlantı Tipi
Screw terminals
Gross weight
480 g
Housing Material
Glass-fibre, reinforced thermoplastic
Contact material
Silver
Min. cable cross-section
1 x 0.5 mm²
Scope of delivery
The actuator TZ/CO is included in delivery.
Sensor length
41 mm
Max. cable cross-section
1 x 1.5 mm²
IP protection class
IP67 | IP65
Ambient Temperature
+0 ... +50 °C | -25 ... +55 °C
Performance level
c | d
Sensor width
129 mm
Conventional thermal current
4 A
Working Principle
electromechanical
Switching principle
Slow action
Mechanical life (min.)
1,000,000
Sensor height
92.5 mm
Magnet switch-on time
100 %
Maks. Sigorta Değeri
4 A gG D-fuse to DIN EN 60269-1
Positive break travel
3.5 mm
Max. actuating speed
0.3 m/s
Tool for the connection
SL / PH 2
Min. Ortam Sıcaklığı
+0 °C
Note (Delivery capacity)
Not available!
Note (Emergency release)
Mounting only outside the guarded area
Note (Relative humidity)
non-condensing | non-icing
Number of safety contacts
2 | 2 / 3 / 4
Maks. Ortam Sıcaklığı
+50 °C
Type of the fixing screws
3x M6
Utilization Category AC-15
230 VAC / 4 A / Screw terminals
Utilization Category DC-13
24 VDC / 4 A / Screw terminals | 24 VDC / 4 A
Number of auxiliary contacts
0 / 1 / 2
Max. switching frequency
1,200 /h
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Note (application conditions)
removable guard | hinged safety guard | sliding safety guard
Positive break force, minimum
20 N
Rated impulse withstand voltage (Uimp)
2.5 kV
Number of actuating directions
4
B10D Normally-open contact (NO)
1,000,000
B10D Normally-closed contact (NC)
2,000,000
Rated insulation voltage (Uᵢ)
250 VAC
Current, Utilisation category AC-15
4 A
Current, Utilisation category DC-13
4 A
Required rated short-circuit current
1,000 A
Voltage, Utilisation category AC-15
230 VAC
Voltage, Utilisation category DC-13
24 VDC
Electrical power consumption, maximum
8.5 W
Coding level according to EN ISO 14119
Low
Tightening torque of electrical connection
0.8 Nm
Positive break force per NC contact, minimum
20 N
Holding force FZh in accordance with EN ISO 14119
1,500 N
Tightening torque of the fastening screws for the housing cover, maximum
0.8 Nm
Tightening torque of the fastening screws for the housing cover, minimum
0.8 Nm