Sipariş No
103046770
Sertifikalar
UKCA cULus TÜV, cULus, FCC, IC, ANATEL, TÜV IC FCC ANATEL
Schmersal
Emniyetli Anahtarlama ve Denetleme
Emniyet Konum Şalterleri (PS Serisi)
AZM201D-ST-T-1P2P2P-2965-1-DU Emniyet Konum Şalterleri (PS Serisi)
AZM201D-ST-T-1P2P2P-2965-1-DU — Schmersal Emniyet Konum Şalterleri (PS Serisi). Başlıca özellikler: Çalışma Prensibi: RFID; Gövde Malzemesi: Glass-fibre, reinforced thermoplastic; IP Koruma Sınıfı: IP66 | IP67; Ortam Sıcaklığı: -25 ... +60 °C | -30 ... +60 °C; Sensör Uzunluğu: 50 mm. Ürün numarası: 103046770. Fiyat ve teslim süresi için teklif isteyebilirsiniz; teknik veriler ve belgeler aşağıdadır.
Ürün Açıklaması
- • IP: IP67
- • Sertifika: UKCA cULus TÜV, cULus, FCC, IC, ANATEL, TÜV IC FCC ANATEL
Standartlar
- • EN IEC 60947-5-3
- • EN ISO 13849-1
- • EN IEC 62061
- • EN IEC 61508
- • EN ISO 14119
Ürün Özellikleri
- • Boşta atanabilir düğme ve LED
- • Thermoplastic enclosure
- • RFID Teknolojisi kullanılarak ISO 14119'a uygun kodlama
- • 3 LEDs to show operating conditions
- • Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 1,5 mm horizontally
- • Suitable for hinged and sliding guards
- • Intelligent diagnosis
- • Protection class IP66, IP67
- • Yüksek tutma kuvveti 2000 N
- • 2 OSSD safety outputs for guard door monitoring
- • 2 OSSD safety outputs for guard locking monitoring
- • simetrik yapı formu, 40mm profillere montaj
- • Acil çıkış / Acil durum kilit açma, sonradan takılmaya uygun
Teknik Özellikler
Not
Torx T10
PIN 1
A1 Supply voltage UB
PIN 2
OUT diagnostic output
PIN 3
A2 GND
PIN 4
Y1 Safety output 1
PIN 5
Y3 safety output 3
PIN 6
Y4 safety output Y4
PIN 7
Y2 Safety output 2
PIN 8
IN Solenoid control
PIN 9
beyaz LED
Coding
Evrensel kodlama
PIN 10
Anahtar butonu
PIN 11
Anahtar butonu
PIN 12
Not used
Kategori
4 | 3
Genel Not
As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.
PFD value
5.00 x 10⁻⁵
PFH value
5.70 x 10⁻¹⁰ /h
Voltage type
DC
Darbe Dayanımı
30 g / 11 ms
Görev Süresi
20 Year(s)
Latching force
30 N
Manual release
Yes
Bağlantı Tipi
Connector M23, 12-pole
Power to unlock
Yes
Gövde Malzemesi
Glass-fibre, reinforced thermoplastic
Protection class
III
Safety functions
Yes
Kirlenme Derecesi
3
Operating voltage
24 VDC -15 % / +10 % (PELV to EN 60204-1)
Relative humidity
30 ... 95 %
Scope of delivery
Actuator must be ordered separately. | Triangular key for AZM 201
Sensör Uzunluğu
50 mm
Titreşim Dayanımı
10 … 150 Hz, genlik 0.35 mm
Actuator monitored
Yes
Çalışma Akımı
1 200 mA | 50 mA
Frequency band RFID
125 kHz
IP Koruma Sınıfı
IP66 | IP67
Ortam Sıcaklığı
-25 ... +60 °C | -30 ... +60 °C
Performans Seviyesi
d | e
Sensör Genişliği
40 mm
Çalışma Prensibi
RFID
Mekanik Ömür (min.)
1 000 000
Note (series-wiring)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Sensör Yüksekliği
220 mm
Switching thresholds
-3 V … 5 V (Low) | −3 V … 5 V (Low) | 15 V … 30 V (High)
Magnet switch-on time
100 %
Electrical fuse rating
short-circuit proof, p-type
Cross-circuit detection
Yes
Maks. Aktüasyon Hızı
0.2 m/s
Short circuit detection
Yes
Min. Ortam Sıcaklığı
-25 °C
Note (Delivery capacity)
Not available!
Note (Relative humidity)
non-condensing
Note (holding force FZh)
1 000 N when used with the AZ/AZM201-B30 actuator, for indoor use.
Voltage drop Ud, maximum
4 V
Duration of risk, maximum
200 ms
Maks. Ortam Sıcaklığı
+60 °C
Note (Actuator monitored)
Safety outputs Y1, Y2
Note (holding force Fmax)
1 300 N when used with the AZ/AZM201-B30 actuator, for indoor use.
Recommendation (actuator)
AZ/AZM201-B1 | AZ/AZM201-B30
Type of the fixing screws
2x M6
Kullanım Kategorisi DC-13
24 VDC / 0.25 A / Gilt für die Ausgänge Y1 und Y2 | 24_0.05
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Relative humidity, maximum
95 %
Relative humidity, minimum
30 %
Time to readiness, maximum
4 000 ms
Aşırı Gerilim Kategorisi
3 | III
Designation, Magnet control
IN
Designation, Safety outputs
Y1 and Y2
Holding force Fmax, maximum
2 600 N
Leakage current Ir, maximum
0.5 mA
Nominal Çalışma Voltajı
24 VDC
Solenoid interlock monitored
Yes
Switching frequency, approx.
1 Hz
Switching frequency, maximum
1 Hz
Test pulse duration, maximum
5 ms | 1 ms | 0.5 ms
Test pulse interval, minimum
40 ms | 100 ms
Test pulse interval, typical
1 000 ms
Darbe Dayanım Gerilimi (Uimp)
0.8 kV
Classification ZVEI CB24I, Sink
C1 | C0 | C2
Electrical fuse rating, maximum
3 A
Length of sensor chain, maximum
200 m
Note, Utilisation category DC-13
Y1 ve Y2 çıkışları için geçerlidir
Transmitter output RFID, maximum
-6 dBm
Absicherung des Diagnoseausganges
short-circuit proof, p-type
Classification ZVEI CB24I, Source
C3 | C1 | C2
Depolama / Taşıma Sıcaklığı
-25 ... +85 °C | -40 ... +85 °C
Nominal Yalıtım Gerilimi (Uᵢ)
32 VDC
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
No-load supply current I0, typical
50 mA
Number of digital fail-safe inputs
2
Current, Utilisation category DC-13
0.05 A | 0.25 A
Gerekli Nominal Kısa Devre Akımı
100 A
Integral system diagnostics, status
Yes
Note (Solenoid interlock monitored)
Safety outputs Y3, Y4
Number of fail-safe digital outputs
2
Voltage, Utilisation category DC-13
24 VDC
Protection class (Operating resource)
3
Coding level according to EN ISO 14119
Low
Note (LED switching conditions display)
Error / functional defect: LED red | Operating condition: LED green | Supply voltage UB: LED green
Current consumption with magnet ON, peak
700 mA / 100 ms
Rated operating current (safety outputs)
250 mA
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Holding force FZh in accordance with EN ISO 14119
2 000 N
Safety Integrity Level (SIL), suitable for applications in
3 | 2
Tightening torque of the fastening screws for the housing cover
0.7 ... 1 Nm (Torx T10)
Reaction time, switching off safety outputs via actuator, maximum
100 ms
Reaction time, switching off safety outputs via safety inputs, maximum
0.5 ms
Tightening torque of the fastening screws for the housing cover, maximum
1 Nm
Tightening torque of the fastening screws for the housing cover, minimum
0.7 Nm