Sipariş No
103055347
Sertifikalar
CCC-EX, ATEX (Konformitätserklärung) CCC-EX
Schmersal
Ex / ATEX Anahtarlama Cihazları
Solenoid Kilitler
EX-AZM 161SK-12/12RKA-3D Solenoid Kilitler
EX-AZM 161SK-12/12RKA-3D — Schmersal Solenoid Kilitler. Başlıca özellikler: Çalışma Prensibi: electromechanical; Anahtarlama Prensibi: slow action, positive break NC contact; Anahtarlama Elemanı: NO contact, NC contact; IP Koruma Sınıfı: IP67; Ortam Sıcaklığı: -10 ... +50 °C. Ürün numarası: 103055347. Fiyat ve teslim süresi için teklif isteyebilirsiniz; teknik veriler ve belgeler aşağıdadır.
Ürün Açıklaması
- • IP: IP67
- • Ağırlık: 1 882 g
- • Sertifika: CCC-EX, ATEX (Konformitätserklärung) CCC-EX
Standartlar
- • EN IEC 60947-5-1
- • EN ISO 13849-1
- • EN ISO 14119
Ürün Özellikleri
- • Vidalı bağlantı
- • Ex-Zone 22
- • Sıkıştırma kuvveti 2000N
- • 6 Contacts
- • Interlock with protection against incorrect locking.
- • kablo girişleri 4 M 16 x 1.5
Teknik Özellikler
Not
All indications including the conductor ferrules. | Electrical life on request. | The tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab. | for 2-channel use and with suitable logic unit.
Montaj
Screws
CADENAS
Yes
Uzunluk
40 mm
Kategori
3 | 1
Genişlik
278 mm
Traceparts
Yes
Yükseklik
122 mm
Kablo Kesiti
1 mm² ... 1 mm²(All indications including the conductor ferrules.) | 1 x 0.75 mm² ... 1 x 1.5 mm² (All indications including the conductor ferrules.)
Please note:
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Power to lock
Yes
Görev Süresi
20 Year(s)
Latching force
30 N | 5 / 30 N
Manual release
Yes
Net Ağırlık
1 882 g
Bağlantı Tipi
Screw terminals
Brüt Ağırlık
1 882 g
Gövde Malzemesi
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Kontak Malzemesi
Silver
Min. Kablo Kesiti
1 x 0.75 mm²
Scope of delivery
Actuator must be ordered separately. | The protective housing is included in the scope of delivery. | Including Ex-certified screwed cable gland and screw plug
Maks. Kablo Kesiti
1 x 1.5 mm²
IP Koruma Sınıfı
IP67
Ortam Sıcaklığı
-10 ... +50 °C
Performans Seviyesi
c | d
Termal Test Akımı
6 A
Çalışma Prensibi
electromechanical
Anahtarlama Elemanı
NO contact, NC contact
Anahtarlama Prensibi
slow action, positive break NC contact
Mekanik Ömür (min.)
1 000 000
Utilisation category
DC-13
Magnet switch-on time
100 %
Maks. Sigorta Değeri
6 A gG D-fuse
Note (Manual release)
For maintenance, installation, etc. | For manual release using M5 triangular key, available as accessory
Positive break travel
10 mm
Rated control voltage
24 VDC | 24 VAC
Impact energy, maximum
7 J
Traceparts, product ID
33-22052019-077196
Type of the screw head
Flat head screw
Maks. Aktüasyon Hızı
1 m/s
Min. Ortam Sıcaklığı
-10 °C
Note (Relative humidity)
non-condensing | non-icing
Güvenlik Kontak Sayısı
4
Maks. Ortam Sıcaklığı
+50 °C
Type of the fixing screws
3x M6
Explosion protection zones
22
Kullanım Kategorisi DC-13
24 VDC / 4 A | 24 VDC / 2.5 A | 24_2.5 | 24 VDC | 2.5 A
Yardımcı Kontak Sayısı
2
Holding force Fmax, maximum
2 600 N
Maks. Anahtarlama Frekansı
1 000 /h
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Explosion protection category
3D
Note (application conditions)
removable guard | hinged safety guard | sliding safety guard
Darbe Dayanım Gerilimi (Uimp)
4 kV
Number of actuating directions
3
B10D Normally-open contact (NO)
1 000 000
Explosion protection designation
D II 3D Ex tc IIIC T80°C Dc X
B10D Normally-closed contact (NC)
2 000 000
Depolama / Taşıma Sıcaklığı
-10 ... +50 °C
Explosion protection: regulations
EN IEC 60079-0 | EN 60079-31
Nominal Yalıtım Gerilimi (Uᵢ)
250 VAC
Current, Utilisation category DC-13
2.5 A
Gerekli Nominal Kısa Devre Akımı
1 000 A
Voltage, Utilisation category DC-13
24 VDC
Tightening torque of the cable gland
3 Nm
Electrical power consumption, maximum
10 W
Coding level according to EN ISO 14119
Low
Cable cross-section of the cable glands
5 ... 10 mm
Actuating play in direction of actuation
5.5 mm
Positive break force per NC contact, minimum
10 N
Cable cross-section of the cable glands, maximum
10 mm
Cable cross-section of the cable glands, minimum
5 mm
Holding force FZh in accordance with EN ISO 14119
2 000 N
Tightening torque of the fastening screws for the housing cover
0.6 Nm