AZM 161CC-12/12RKEU -110/230
Order No 101187920
Certificates cULus cULus, IFA, CCC
Schmersal Safe Switching and Monitoring Emniyet Konum Şalterleri (PS Serisi)

AZM 161CC-12/12RKEU -110/230

AZM 161CC-12/12RKEU -110/230 — Schmersal product. Key specifications: Working Principle: electromechanical; Switching principle: slow action, positive break NC contact; IP protection class: IP67; Ambient Temperature: -30 ... +60 °C; Terminal connection: cage terminals. Article number: 101187920. Request a quote for pricing and lead time; technical data and documents are listed below.

Product Description

  • • IP: IP67
  • • Ağırlık: 445 g
  • • Sertifika: cULus cULus, IFA, CCC

Standards

  • • EN IEC 60947-5-1
  • • EN ISO 13849-1
  • • EN ISO 14119

Product Features

  • • Large wiring compartment
  • • Manual release, rear
  • • cable entries 4 M 16 x 1.5
  • • 6 Contacts
  • • Thermoplastic enclosure
  • • Double-insulated
  • • Interlock with protection against incorrect locking.
  • • Long life

Technical Specifications

Note All indications including the conductor ferrules. | Electrical life on request. | The tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab. | at 10% Ie and ohmic load | for 2-channel use and with suitable logic unit.
Mounting Screws
Category 3 | 1
Unlocking Twist-to-unlock mechanism (auxiliary release)
Cable Cross-Section 0.25 mm² ... 1.5 mm²(All indications including the conductor ferrules.) | 0.25 mm² ... 0.75 mm² (All indications including the conductor ferrules.) | 0.25 mm² ... 1.5 mm² (All indications including the conductor ferrules.)
Please note: Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Strip length 6 mm
Cable entry 4 x M16 x 1,5
Mission time 20 Year(s)
Latching force 30 N | 5 / 30 N
Manual release Yes
Net Ağırlık 445 g
Connection type Screw terminals; Cage clamps; Connector plug M12, 4-pole, (A-coding); Connector plug M12, 8-pole, (A-coding); 2 x Connector plug M12, 4-pole, A-coding
Power to unlock Yes
Gross weight 445 g
Housing Material Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Contact material Silver
Protection class II
Min. cable cross-section 0.25 mm²
Scope of delivery Actuator must be ordered separately.
Sensor length 45 mm
Max. cable cross-section 1.5 mm²
IP protection class IP67
Ambient Temperature -30 ... +60 °C
Performance level e | c | d
Sensor width 130 mm
Conventional thermal current 6 A
Working Principle electromechanical
Switching element Magnet: 1 NO contact, 2 NC contacts / Actuator: 1 NO contact, 2 NC contacts
Switching principle slow action, positive break NC contact
Degree of protection IP67
Mechanical life (min.) 1,000,000
Sensor height 90 mm
Allowed type of cable solid single-wire | solid multi-wire | flexible
Magnet switch-on time 100 %
Maks. Sigorta Değeri 6 A gG D-fuse
Note (Manual release) back side | For manual release using M5 triangular key, available as accessory
Positive break travel 10 mm
Rated control voltage 110 VAC | 230 VAC
Interlocking principle Power to unlock
Terminal connection cage terminals
Type of the screw head Flat head screw
Max. actuating speed 2 m/s
Increased latching force Yes
Min. Ortam Sıcaklığı -30 °C
Note (Delivery capacity) Not available!
Note (Performance Level) Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions.
Note (Relative humidity) non-condensing | non-icing
Number of safety contacts 3 / 4 / 5 | 4
Maks. Ortam Sıcaklığı +60 °C
Type of the fixing screws 3x M5
Utilization Category AC-15 230 VAC / 4 A / Screw terminals | 230_4
Utilization Category DC-13 24 VDC / 4 A | 24_2.5
Number of auxiliary contacts 1 / 2 | 2
Holding force Fmax, maximum 2,600 N
Max. switching frequency 1,000 /h
Test pulse duration, maximum 5 ms
Test pulse interval, minimum 50 ms
Note (application conditions) removable guard | hinged safety guard | sliding safety guard
Positive break force, minimum 20 N
Rated impulse withstand voltage (Uimp) 4 kV
Number of actuating directions 3
B10D Normally-open contact (NO) 1,000,000
B10D Normally-closed contact (NC) 2,000,000
Depolama / Taşıma Sıcaklığı -40 ... +85 °C | -30 ... +85 °C
Rated insulation voltage (Uᵢ) 250 VAC | 250 VConnector, 4 poles - 250 VConnector, 8 poles - 60 V
Current, Utilisation category AC-15 4 A
Current, Utilisation category DC-13 2.5 A
Required rated short-circuit current 1,000 A
Voltage, Utilisation category AC-15 230 VAC
Voltage, Utilisation category DC-13 24 VDC
Electrical power consumption, maximum 10 W
Protection class (Operating resource) 2
Coding level according to EN ISO 14119 Low
Actuating play in direction of actuation 5.5 mm
Colour of the upper part of the enclosure Black
Colour of the bottom part of the enclosure black
Storage and transport temperature, maximum +85 °C
Storage and transport temperature, minimum -40 °C
Positive break force per NC contact, minimum 10 N
Holding force FZh in accordance with EN ISO 14119 2,000 N
Permissible installation altitude above sea level, maximum 2,000 m
Tightening torque of the fastening screws for the housing cover 0.6 Nm

More products in this category

shopping_cart
Quote Cart
shopping_cart

Your cart is empty.

You can add products from product pages.

compare_arrows Compare 0 / 3