Order No
101193281
Certificates
cULus
Schmersal
Safe Switching and Monitoring
Emniyet Konum Şalterleri (PS Serisi)
AZM 200CC-T-SD2PA
AZM 200CC-T-SD2PA — Schmersal product. Key specifications: Working Principle: inductive; Housing Material: Glass-fibre, reinforced thermoplastic; IP protection class: IP67; Ambient Temperature: -25 ... +60 °C | -25 ... +50 °C; Sensor length: 50 mm. Article number: 101193281. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Sertifika: cULus
Standards
- • EN IEC 61508
- • EN IEC 60947-5-1
- • EN IEC 60947-5-3
- • EN ISO 13849-1
Product Features
- • Guard locking monitored
- • serial diagnostic output
- • Thermoplastic enclosure
- • Electronic contact-free, coded system
- • Max. length of the sensor chain 200 m
- • Self-monitoring series-wiring
- • 3 LEDs to show operating conditions
- • Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 1,5 mm horizontally
- • Intelligent diagnosis
Technical Specifications
Note
Torx T10 | All indications including the conductor ferrules.
EPLAN
Yes
Category
4
General note
As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.
Cable Cross-Section
0.25 mm² ... 1.5 mm²(All indications including the conductor ferrules.) | 0.25 mm² ... 0.75 mm² (All indications including the conductor ferrules.)
Voltage type
DC
Shock resistance
30 g / 11 ms
Power to lock
Yes
Series-wiring
Yes
Mission time
20 Year(s)
Latching force
30 N
Manual release
Yes
Bağlantı Tipi
Spring pulley connection
Housing Material
Glass-fibre, reinforced thermoplastic
Protection class
II
Safety functions
Yes
Pollution degree
3
Min. cable cross-section
0.25 mm²
Operating voltage
24 VDC -15 % / +10 %
Operation current
150 mA
Relative humidity
30 ... 95 %
Scope of delivery
Triangular key for AZM 200 | Actuator must be ordered separately.
Sensor length
50 mm
Vibration resistance
10 … 55 Hz, amplitude 1 mm
Max. cable cross-section
1.5 mm²
Serial diagnostics
Yes
Wire cross-section
23 ... 15 AWG
Wiring capacitance
50 nF
Operating current
1,200 mA
IP protection class
IP67
Ambient Temperature
-25 ... +60 °C | -25 ... +50 °C
Performance level
e
Sensor width
40 mm
Working Principle
inductive
Mechanical life (min.)
1,000,000
Note (series-wiring)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Sensor height
220 mm
Switching thresholds
-3 V … 5 V (Low) | −3 V … 5 V (Low) | 15 V … 30 V (High)
Allowed type of cable
solid single-wire | solid multi-wire | flexible
Magnet switch-on time
100 %
Electrical fuse rating
short-circuit proof, p-type
Reaction time, maximum
60 ms
Cross-circuit detection
Yes
Max. actuating speed
0.2 m/s
Short circuit detection
Yes
Min. Ortam Sıcaklığı
-25 °C
Note (Delivery capacity)
Not available!
Note (Relative humidity)
non-condensing
Note (holding force FZh)
1,000 N when used with the AZ/AZM201-B30 actuator, for indoor use.
Voltage drop Ud, maximum
4 V
Duration of risk, maximum
120 ms
Number of safety contacts
2
Maks. Ortam Sıcaklığı
+50 °C
Note (holding force Fmax)
1,300 N when used with the AZ/AZM201-B30 actuator, for indoor use.
Recommendation (actuator)
AZ/AZM 200-B1
Design of control elements
short-circuit proof, p-type
Utilization Category DC-13
24 VDC / 0.25 A
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Relative humidity, maximum
95 %
Relative humidity, minimum
30 %
Time to readiness, maximum
4,000 ms
Overvoltage category
3 | III
Current consumption at 24 V
5 mA
Holding force Fmax, maximum
2,600 N
Leakage current Ir, maximum
0.5 mA
Nominal Çalışma Voltajı
24 VDC
Wire cross-section, maximum
15 AWG
Wire cross-section, minimum
23 AWG
Solenoid interlock monitored
Yes
Switching frequency, approx.
1 Hz
Rated impulse withstand voltage (Uimp)
0.8 kV
Fuse rating to UL 508, maximum
4 A
Depolama / Taşıma Sıcaklığı
-40 ... +85 °C | -25 ... +85 °C
Designation, Serial diagnostic SD
OUT
Rated insulation voltage (Uᵢ)
32 VDC
No-load supply current I0, typical
600 mA
Number of series-wiring of sensors
31
Current, Utilisation category DC-13
0.25 A
Integral system diagnostics, status
Yes
Voltage, Utilisation category DC-13
24 VDC
Protection class (Operating resource)
2
Note (LED switching conditions display)
Error / functional defect: LED red | Operating condition: LED green | Supply voltage UB: LED green
Rated operating current (safety outputs)
250 mA
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Holding force FZh in accordance with EN ISO 14119
2,000 N
Safety Integrity Level (SIL), suitable for applications in
3
Tightening torque of the fastening screws for the housing cover
0.7 ... 1 Nm (Torx T10)
Tightening torque of the fastening screws for the housing cover, maximum
1 Nm
Tightening torque of the fastening screws for the housing cover, minimum
0.7 Nm