Order No
103049512
Certificates
ATEX (Declaration of Conformity)
Schmersal
Ex / ATEX Anahtarlama Cihazları
Solenoid Interlocks
EX-AZM 170-02ZK-R/P-3GD Solenoid Interlocks
EX-AZM 170-02ZK-R/P-3GD — Schmersal Solenoid Interlocks. Key specifications: Working Principle: electromechanical; Switching principle: Slow action; Switching element: Opener (NC); IP protection class: IP67; Ambient Temperature: -15 ... +45 °C. Article number: 103049512. Request a quote for pricing and lead time; technical data and documents are listed below.
Product Description
- • IP: IP67
- • Ağırlık: 279 g
- • Sertifika: ATEX (Konformitätserklärung)
Standards
- • EN IEC 60947-5-1
- • EN ISO 13849-1
Product Features
- • IDC method of termination
- • Explosion protection for ATEX Zones 2 and 22
- • 1 Cable entry M 20 x 1.5
- • Interlock with protection against incorrect locking.
- • High holding force
- • 90 mm x 84 mm x 30 mm
Technical Specifications
Note
Electrical life on request. | for 2-channel use and with suitable logic unit.
Mounting
Screws
CADENAS
Yes
Length
93 mm
Category
3 | 1
General note
This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules
Width
140 mm
Traceparts
Yes
Height
72 mm
Cable Cross-Section
1 mm² ... 2 mm²
Mission time
20 Year(s)
Latching force
5 N | 5 / 30 N
Manual release
Yes
Net Ağırlık
279 g
Bağlantı Tipi
IDC method of termination
Power to unlock
Yes
Gross weight
279 g
Housing Material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Contact material
Silver
Min. cable cross-section
2 x 1.0 mm², flexible
Scope of delivery
Actuator must be ordered separately. | The protective housing is included in the scope of delivery. | Including Ex-certified screwed cable gland and screw plug
Max. cable cross-section
1 x 1 mm², flexible
IP protection class
IP67
Ambient Temperature
-15 ... +45 °C
Performance level
e | c | d
Conventional thermal current
2 A
Working Principle
electromechanical
Switching element
Opener (NC)
Switching principle
Slow action
Mechanical life (min.)
1,000,000
Utilisation category
AC-15 | DC-13
Allowed type of cable
solid single-wire | flexible
Magnet switch-on time
100 %
Maks. Sigorta Değeri
6 A gG D-fuse
Note (Manual release)
bottom | For manual release using M5 triangular key, available as accessory
Positive break travel
11 mm
Rated control voltage
24 VDC | 24 VAC
Impact energy, maximum
7 J
Type of the screw head
Flat head screw
Max. actuating speed
1 m/s
Manufacturer declaration
ATEX Zone 2 and 22
Min. Ortam Sıcaklığı
-15 °C
Note (Performance Level)
Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions.
Note (Relative humidity)
non-condensing | non-icing
Number of safety contacts
2 | 1 / 2
Maks. Ortam Sıcaklığı
+45 °C
Explosion protection zones
22 | 2
Utilization Category AC-15
2 A | 230 VAC
Utilization Category DC-13
24 VDC | 2 A | 24 VDC / 2 A
Number of auxiliary contacts
1
Holding force Fmax, maximum
1,300 N
Max. switching frequency
1,000 /h
Test pulse duration, maximum
5 ms
Test pulse interval, minimum
50 ms
Explosion protection category
3G | 3D
Positive break force, minimum
17 N
Rated impulse withstand voltage (Uimp)
4 kV
B10D Normally-open contact (NO)
1,000,000
Explosion protection designation
D II 3D Ex tc IIIC T80°C Dc X | D II 3G Ex nC IIB T5 Gc X
B10D Normally-closed contact (NC)
2,000,000
Explosion protection: regulations
EN IEC 60079-0 | EN IEC 60079-15 | EN 60079-31
Rated insulation voltage (Uᵢ)
250 VAC
Tightening torque of the cable gland
4.5 Nm
Electrical power consumption, maximum
10 W
Coding level according to EN ISO 14119
Low
Cable cross-section of the cable glands
6.5 ... 12 mm
Cable cross-section of the cable glands, maximum
12 mm
Cable cross-section of the cable glands, minimum
6.5 mm
Holding force FZh in accordance with EN ISO 14119
1,000 N
Tightening torque of the fastening screws for the housing cover, maximum
0.5 Nm
Tightening torque of the fastening screws for the housing cover, minimum
0.4 Nm